Checklist - Craftsman EZ3 917.273070 Owner's Manual

Double Loop Retainer Front Mower
Spring (inward Bracket
pointing deck pins)
Suspension Front
Chas= Arms
Bracket
Shoulder Gauge
Bott Wheel
3/8 Washer /
3/8-16
Center Double Loop
Locknut Retainer Spring
I Use Plierd___ for )
Retainer Springs Anti-Sway Bar
Idler Pulley
f Lo°°wP n
Link
Retainer Spring
Discharge
Guard
V'CHECKLIST
Before you operate and enjoy your new
tractor,we wish to assure that you receive
the best performanceand satisfaction
from this qualityproduct.
Please review the following checklist:
,/ All assemblyinstructions have been
completed.
,/"No remainingloose parts in carton.
4"Battery is propedypreparedand
charged. (Minimum1 hour at 6 amps).
4"Seat is adjustedcomfortablyand
tightened securely.
,/All tires are propedyinflated. (For
shippingpurposes,the tires were
ovednflatedat the factory).
,/Be sure mower deck is properlyleveled
side-to-side/fmnt-to-rear f or best cutting
results. (Tires mustbe properlyinflated
for leveling).
•/ Check mowerand drive belts. Be sure
they are routed propedyaround pulleys
and inside all belt keepers.
/ Check wiring. See that all connections
are stillsecure and wires are propedy
clamped.
While learninghow to use yourtractor,
pay extra attentionto the following
importantitems:
4" Engine oil is at properlevel.
,/Fuel tank is filled with fresh, clean,
regular unleaded gasoline.
,/Become familiarwith all controls- their
locationand function. Operate them
before you start the engine.
,/Be sure brake systemis in safe
operating condition.
12