Installation - GE Monogram ZIFI240 Owner's Manual

Installation
Fr_sh-t_od I_!irig'erator
Installing
custom 3/4"
door panel
and handle
(con t. )
(ZIF[240 model
o, ly)
Assemble overlay panels ._
with
glue
and
screws:
__-_
Overlay P anel ,
on tile backer panel,
left to tigtlt and top to _ !
botton/. Secure the !_acker Panel!_-_
panels with glue.
2. Center tile spacer/backer panel on tile
oxerlay panel. Secure with glue and screws.
Countersink all screws into tile backer
panel.
Custom Panel Hinge Routing Dimensions
Use a 3/4" roumr bit to cut a notch
into file back side of file assembled panel
3/8" toward tile flont of rile overlay panel,
3/4" deep and 7/8" wide.
screws into the backer panel. Screws cannot
protrude from tile backer panel.
ScrewsMust
BeCountersunk
Into Panel
Ha!dl_e
DoorPanels
4. Slide oxerlay panel into tile door trim.
HHHH
HHHH
HHHH
In.stall cn*stom door panel and handle:
1. Open door to 90 °.
2. Remoxe 5 screws holding trim; lift off trim.
Retain screws.
_°-
3. A custom handle of your choice, supplied
by your cabinet makei; must be installed
onto tile overlay panel before tile panels
are slid into tile trfin. Countersink all
5. Reinstall tile side uim using tile Uim
screws reinoxed earlieE
_°
6. Place the brushed decoratixe cover oxer
tile side trim to hide tile screw heads.
Ensure side tdm is alig_md top to bottom
and flont to back. Snap into place.
NOTE: For shipping puq)oses tile
brushed decorafixe coxer will be secured
to tile fiont of tile unit.
15