Bagger Removal - Craftsman 102.249020 Owner's Manual

40-inch mower grass catcher
Table of Contents

Advertisement

STORAGE
A
CAUTION: Do not leave grass in bagger
containers. Empty containers after each use
andbefore storing. Failure to do so may result
in spontaneous combustion which could develop
into a fire.
To put the attachment Into storage:
• Inspect attachment for visible signs of wear,
breakage or damage. Order any parts required and
make necessary repairs.
• Clean unit thoroughly.
NOTE: DO NOT use harsh or abrasive cleaners on any
painted surface.
• Touch up all painted areas to prevent rust.
• Store in a cool, dry, protected place.
BAGGER REMOVAL
A
WARNING:Tractor
must be used with entire
grass catcher system in place. If using tractor to
mulch or side discharge entire grass collection
system must be removed,
To Remove bagger from unit: (Refer to assembly
illustrations).
• Remove lower boot and bagger tube.
• Unhook and raise cover.
• Slide baskets out.
• Remove wing nuts holding cover assembly to bagger
frame and remove cover assembly.
• Remove vanes from blades. Save vanes and
hardware.
Tractor may now be used to mulch or side discharge
with counterweight
and bagger frame still on tractor.
PROBLEM
CAUSE
CORRECTION
Bagger fails to pickup
1.
Baskets are full.
1.
See "Emptying Baskets" in Operation Section.
grass or leaves
2.
Bagger is clogged.
2.
See "Clearing a Clog" in Operation section.
13

Advertisement

Table of Contents
loading

Table of Contents