Troubleshooting Tips - GE JVM1860 Owner's Manual

Before you call for service...
Troubleshooting -tips
Save time and money! Review the charts on the following pages
first and you may not need to call for service.
ii_iiiiiiiiiiiiiii?yiiiiiiiiii!ii'_
Possible Causes What To Do
Oven will not start
A fuse hi your home may Replace fllse or reset
be blown or the circuit dr( uit breakel:
breaker tripped.
Power surge. Unphlg tile lnicrow_we
oxen; then plug it back in.
Plug not fully hlserted
hlto wall oudet.
Make sure the 3-prong
phlg on tile oven is dilly
inserted into wall outlet.
Floor of the oven is warm,
even when the oven has
not been used
"LOCKED" appears on
the display
"SENSOR ERROR" appears
on the display
Youhearan unusual,
low-tonebeep
Foodamount t oolarge
forSensorReheat
The cooktop light is
located below the oven
floor. When the light is
on, the heat it produces
may make the oven floor
get warm.
The conwol has been
locked.
When ttshlg a Sensor
feature, the door was
opened before stemn
could be detected.
Steam was not detected
ill nl_illlUlll amotmt
of lime.
You have tried to start
the Remhlder without
a valid time of day.
You have tried to start
the Auto Nite Light
without a valid thne of
day entered for the on-time
mid off-time.
You have tried to chmlge
the power level when it is
not allowed.
Sensor Reheat is for
sil_gle servh_gs of
reconunended foods.
"I]fis is norm:d.
Press and hold
CLEAR/OFF
/or _ff_out 3 seconds to
/mlock the COlltrol.
I)o not open door until
steam is sensed and time
is shown counting down
on the displa}.
Llse _me Cook to heat
/or more thne.
Start over and enter a
valid time of din.
Start over and enter a
_li(t time of din.
Mallv of tile o_,en's
tt'attlres
are preset and cmmot be
changed.
Use Brae Cook tDr large
aI//O/llltS of t()()d.
38