Advertisement
Available languages
Available languages
About the temperaturecontrols,
www.GEAppliances.co
The temperature controls are preset in the factory at5 for both
the refrigerator and freezer compartments. Allow 24 hours for the
temperature to stabilize to the preset recommended settings.
Several adjustments may be required. Each time you adjust
controls, allow24 hours for the refrigerator to reach the setting
you have selected.
Setting either or both controls to 0 stops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
Performance Ak FlowSystem
The
Pettbt_nance
:Mr How
Svsteln
is designed
to nmxinfize
temperature
control
in the
reliigerator
and
fl'eezer
compartments.
This
tmique
spedal
feature
consists
of the _dI" Tower
along
the
back
wall of the
reiiigerator
and
the
_di" Tunnel
on the
bottoln
portion
of the
fl'eezer
rear
wall. Pladng
fi_od in fl'ont
of the
lou\'eI_
on these
colni_onents
will not aftect
i_eltbI_nance.
_dthough
the
_di" Tower
and
the _di" Tunnel
can
be relnoved,
doing
so will affect
temperattu'e
perfim/mi_ce.
(For
relnoval
instructions,
on-line,
24 houi_
a
day, contact
us at GEAppliances.com
or call 800.GE.CARES.
In Canada,
contact
us at w_v.geappliances.ca
or call 1.800.361.3400.)
Advertisement
