Advertisement
WARNING:Whenservicing useonlyidentical
Craftsman replacement pads.Useof anyotherparts
m_/create
a hazard or cause product damage.
GENERAL
Only the parts shown on parts list, page eleven, are
intended to be repaired or replaced by the customer. All
other pads represent an important part of the double
insulation system and should be serviced only by a
qualified Sears service technician.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.
,_.
WARNING:
Do not at any time let brake fluids,
gasoline, petroleum-based products, penetrating
oils, etc. come in contact with plastic parts. They
contain chemicals that can damage, weaken, or
destroy plastic.
When electric tools are used on fiberglass boats, sports
cars, wallboard, spackling compounds, or plaster, it has
been found that they are subject to accelerated wear and
possible premature failure, as the fiberglass chips and
grindings are highly abrasive to beadngs, brushes,
commutators, etc. Consequently it is not recommended
that this tool be used for extended work on any fiberglass
material, wallboard, spackling compounds, or plaster.
During any use on these materials, it is extremely
important that the tool is cleaned frequently by blowing
with an air jet.
EXTENSION CORDS
The use of any extension cord will cause some loss of
power. To keep the loss to a minimum and to prevent'tool
overheating, use an extension cord that is heavy enough
to carry the current the tool will draw.
A wire gage size (A.W.G.) of at least 16 is recommended
for an extension cord 100 feet or less in length. When
working outdoors, use an extension cord that is suitable for
outdoor use. The cord's jacket will be marked WA.
_i,
CAUTION:
Keep extension cords away from any
sanding area and position the cord so that it will not
get caught on lumber, tools, etc., during sanding
operation.
_1, WARNING:
Check extension cords before each
m
use. If damaged replace immediately. Never use tool
with a damaged cord since touchir_gthe damaged
area could cause electrical shock resulting in sedous
injury.
_1,
WARNING:
Always wear safety goggles, or safety
glasses with side shields during power tool operation
or when blowing dust. If operation is dusty, also wear
a dust mask.
The following recommended
accessories are currently available at Sears Retail Stores:
OPTIONAL
SCRAPER
ASSEMBLY
The optional scraper assembly is available to fit to the front
of your detail sander. This allows for easy removal of paint
from window panes and frames. It is also ideal for removal of
built up glue or paint.
•
100 Grit Cloth Backed ...................... Package of 10
•
150 Grit Cloth Backed ...................... Package of 10
•
220 Grit Cloth Backed ...................... Package of 10
•
Assorted Pack ..................................
Package of 10
•
Power Sanding Triangles - 3 Each - Fine, Medium, Coarse
WARNING:
The use of attachments not listed above might be hazardous and must not be used.
9
Advertisement
