Advertisement
SERVICE AND ADJUSTMENTS
CAUTION:
BEFORE PERFORMING
ANY SERVICE OR ADJUSTMENTS:
i
Depress clutch/brake
pedal fully and set parking brake.
Place motion control
lever in neutral (N) position,
Place attachment
clutch
in "DISENGAGED"
position,
•
Turn ignition key "OFF" and remove key.
•
Make sure the blades and all moving parts have completely stopped,
•
Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with
plug.
"
TO REMOVE
MOWER
(See Fig. 20)
•
Prace attachment
clutch in "DISENGAGED"
position,
•
Turn height adjustment knob to lowest setting,
Lower mower to its lowest position,
Remove retainer spring holding anti-swaybar to chas-
sis bracket and disengage anti-swaybar from bracket.
Remove
retainer
springs from suspension
arms at
deck and disengage
arms from deck.
•
Raise attachment
lift to its highest position.
•
Remove two retainer springs from each front link and
remove links.
•
Slide mower forward and remove belt from electric
clutch pulley.
•
Slide mower out from under right side of tractor.
IMPORTANT:
IF AN ATTACHMENT OTHER THAN THE
MOWER DECK IS TO BE MOUNTED ON THE TRACTOR,
REMOVE THE FRONT LINKS.
TO INSTALL
MOWER
Follow procedure described in "INSTALL MOWER AND
DRIVE BELT' in the Assembly section of this manual.
ADJUSTMENT
LIFT
FRONT
LINKS
SUSPENSION
SUSPENSION
BRACKET_
ARMS
FRONT MOWER
•
BRACKET
CHASSIS
FRONT
SUSPENSION
BRACKET
RETAINER
SPRING
RETAINER
;PRINGS
ANTI-SWAY
BAR
RETAINER
SPRINGS
BRACKET
FIG. 20
21
Advertisement
