Know Your Tiller; Safety Decal - Craftsman 917.299691 Owner's Manual

OPERATION
KNOW YOUR TILLER
READ THiS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR T_LLER.
Compare the illustrations with your tiller to familiarize yourself with the location of various controls and adjustments. Save this
manual for future reference.
RECOIL
STARTER
HANDLE
©
LEVELING
SHIELD
FIGURE to
MEETS ANSl SAFETY REQUUREMENTS
Our tillers conform to the safety standards of the American National Standards institute,
THROTTLE CONTROL - is used to control engine speed,
DRIVE CONTROL BAR - is used to engage tiller,
DEPTH STAKE - controls depth at which tiller witi dig.
LEVELING SHIELD - protects small plants from being
buried.
CHOKE CONTROL - is used when starting a cold engine
SHIFT LEVER - is used to shift transmission gears.
SNDFT LEVER iNDICATOR- shows which gear the tiller is
currently in.
RECOIL STARTER HANDLE - is used to start the engine.
OUTER SIDE SHIELD - is adjustable for protecting small
plants from being buried,
SAFETY DECAL
The decat shown below is located on the handle of your tiller.
9