Service And Adjustments; To Remove Mower; To Install Mower - Craftsman 917.272059 Owner's Manual

Lawn tractor 16 hp, 42" mower electric start 6 speed transaxle
Table of Contents

Advertisement

A
WARNING:
TO AVOID SERIOUS
INJURY,
BEFORE
PERFORMING
ANY
SERVICE
OR ADJUSTMENTS:
1. Depress clutch/brake pedal fully and set parking brake.
2.
Place gearshift
lever in neutral
(N) position.
3.
Place attachment
clutch
in "DISENGAGED"
position.
4. Turn ignition
key to "STOP" and remove key.
5.
Make sure the blades
and all moving parts have completely
stopped.
6.
Disconnect
spark plug wire from spark plug and place wire where it cannot
come in contact with plug.
TRACTOR
TO REMOVE
MOWER
Mower will be easier to remove from the
right side of tractor.
1. Place attachment clutch in "DISEN-
GAGED" position.
2.
Move attachment lift lever forward to
lower mower to its lowest position.
3.
Roll belt off engine pulley.
IMPORTANT:
If an attachment
other than
the mower deck is to be mounted
on the
tractor, remove the front links and hook
the clutch spring Into square hole in
frame.
TO INSTALL
MOWER
1. Raise attachment lift lever to its
highest position.
4.
Remove
small retainer
spring, and lift
clutch spring
off pulley bolt.
5.
Remove
large retainer
spring,
slide
collar off and push housing
guide out
of bracket.
6.
Disconnect
anti-sway
bar from chassis
bracket
by removing
retainer
spring.
7.
Disconnect
suspension
arms from
rear deck brackets
by removing
retainer
springs.
8. Disconnect
front links from deck by
removing
retainer
springs.
9.
Raise lift lever to raise suspension
arms. Slide mower out from under
tractor.
2.
Slide mower
under tractor with
deflector
shield to right side of tractor.
3.
Lower lift lever to its lowest position.
4. Connect
front links to mower deck and
secure
with retainer
springs.
5. Connect
suspension
arms to rear
deck brackets
and secure with
retainer
springs.
6. Connect
anti-sway
bar to chassis
bracket
and secure with retainer
spring.
7.
Push clutch
cable housing
guide into
bracket,
slide collar onto guide and
secure with large retainer
spring.
8.
Install belt onto engine
pulley.
Small Retainer Spring
Clutch Sprin
Suspension Arms "" _';'` ;'%
Square Hole
Engine Pulley
Link
Retainer Sprin!
Anti-Sway
Collar
,_rSprings
(Both Sides)
Housing Guide
Bracket
Large Retainer Spring
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents