Warning Displays - FujiFilm FINEPIX A900 Owner's Manual

Warning Displays
• The Memory Card contact area is soiled, * Wipe the contact area on the Memory Card with a
• The Memory Card format is incorrect, soft, dry cloth. It may be necessary to format the
Memory Card (*p.93). If the message still
CARD ERROR appears, replace the Memory Card.
• Camera fault. * Contact your FUJIFILM dealer.
• The Memory Card is damaged.
• Inserted Memory Card is not compatible with your * Insert a compatible Memory Card that is operation-
camera, checked at FUJIFILM Corporation (*p.19).
MEMORY FULL The internal memory or Memory Card is full, Erase some images in internal memory or Memory
Card (*p.38), or use a Memory Card that has ample
MEMORY FULL free space,
• The data could not be recorded due to a Memory * Re-insert the Memory Card or turn the camera off
Card error or a connection error between the and then on again, If the message still appears,
Memory Card and camera, contact your FUJIFILM dealer,
WRITE ERROR * The image cannot be recorded as it is too large to * Use a new Memory Card.
fit in the available space on the Memory Card,
• The Memory Card or internal memory is not * Format the Memory Card or internal memory on
formatted, the camera (,p.93).
The SD Memory Card switch is slide to the "Lock" Unlock the protection by sliding it back _ *p.20).
PROTECTED CARD
side.
INTERNAL MEMORY IS The data could not be recorded or copied since the Erase some images from the internal memory
FULL internal memory is full, _ *p,38), or use a Memory Card that has ample free
space.
INSERT A NEW CARD
BUSY The timing for recording was incorrect because the Use a Memory Card that was formatted on the
Memory Card was formatted on a PC. camera.
The frame number has reached 999-9999. ,_1 Insert a formatted Memory Card into the camera.
_2_ Set RENEW as the FRAME NO. setting in the
SET-UP menu (_p.9O).
FRAME NO. FULL _3_ Start taking pictures (The frame number starts
from "100-0001").
_< Set CONT. as the FRAME NO. setting in the
SET-UP menu.
126