FujiFilm FINEPIX A900 Owner's Manual page 34

CAUTION
• FinePix A900/FinePix A825/FinePix A820/FinePix
A610/FinePix A800 is compatible with PTP (Picture
Transfer Protocel)/MTP (Media Transfer Protocol). A
PTP/MTP-compatible camera is a camera which can
recognize the PC and printer automatically when
connected.
• Always use the FUJIFILM AC Power Adapter AC-3VX
(sold separately). If the camera suddenly loses power
during data exchange, the Memory Card or internal
memory could be damaged.
• Do not disconnect the USB cable (mini-B) when the
camera is communicating with a PC. If disconnecting
the USB cable (mini-B) during communication, the files
on the Memory Card or internal memory may cause
damage.
• In Mac OS X, you must set the automatic setup when
the first time you connect the camera to your PC.
• Make sure that USB cable (mini-B) is connected
correctly and pushed in.
• Perform pre-arranged steps to disconnect and turn off
the camera (*p.111).
• When the camera and PC are exchanging data, the
indicator lamp blinks alternately green and orange.
• Auto power off is disabled during PC connection.
• Before replacing the Memory Card, always disconnect
the camera from the PC. See p.111 for information on
the disconnection procedure.
• The camera and PC may be exchanging data even
when "Copying" disappears on your PC screen. Before
disconnecting the USB cable (mini-B), always check
that the indicator lamp is off.
• When Windows 98 SE is used, the supplied software
must be installed first before connecting the camera to
a PC using the USB cable. The PC will not recognize
the camera if it is connected before the installation.
_4;Set a PC.
Windows 98 SE / Me / Macintosh
CAUTION
The Windows CD-ROM may also be required during
installation. In this event, change CD-ROMs as directed
by the on-screen instructions.
• FinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box)
appears, Follow the instructions provided on screen to
save the images. To proceed without saving the
images click the [Cancel] button.
_' MEMO
• You can only see images saved on a PC. Save images
on a PC.
• If you cancel saving by clicking the [Cancel] button,
press POWER to turn off the camera and then
disconnect it from the PC.
¢e
_s.
109