Advertisement
Available languages
Available languages
9
INSTALL BELT ON ENGINE CLUTCH
PULLEY (M)
°
Disengage belt tension rod (K) from
locking bracket (L).
-
Install bettonto engine clutch pulley (M).
8
ATTACH FRONT LINK (E)
•
]3Jrn steering wheel to position wheels
straight forward.
•
From front of tractor, insert rod end of
front link (E) through front hole in tractor
front suspension bracket (F).
•
Movetoleftsideofmower
andand insert
large retainer spring (G) through hole in
front link (E) behind front suspension
bracket (F).
Insert other end of link (E) into hole in
front mower bracket (H) and secure with
washer and smalt retainer spring (J).
NOTE: Requires deck lifting.
Front Unk
i
._..... ' / .......... "\
M.Engine
Clutch Pulley
IMPORTANT: Check belt for proper routing
in all mower pulley grooves and under
mandrel covers.
•
Engage belt tension rod (K) on locking
bracket (L).
_ICAUT!ON:
Belt tension rod is spring
foaded. Have atight grip on rod and engage
slowly.
•
Raise attachment lift lever to highest
position.
•
If necessary,
adjust
gauge wheels
before operating mower as shown inthe
Operation section of this manual.
MOWER DRIVE BELT INSTALLATION
Follow
procedure
described
in "TO
REPLACE MOWER BLADE DRIVE BELT"
in the "Service and Adjustments" section of
this manual.
1!
Advertisement
