For Best Results - Frigidaire FRFW3700LW0 Use & Care Manual

Operating Your Washer, continued
5 Add laundry products to the dispenser.
For best results
Use a low-sudsing, high efficiency
detergent to prevent oversudsing in
front load washers. Look for this symbol
on the detergent label:
Detergent, liquid chlorine bleach and liquid fabric soft-
ener will be dispensed at the proper times in the cycle.
Open and close the dispenser drawer slowly. Closing
the drawer too quickly could result in early dispensing
of the bleach or fabric softener.
Liquid or Powder Detergent
• Use the cap or scoop provided by the detergent
manufacturer to measure the amount recommended.
- Detergent dosage may need to be adjusted for
water temperature, water hardness, load size and
soil level.
Other Wash Products
Water conditioner, detergent booster and enzyme prod-
ucts may be added with the detergent. Put liquid prod-
ucts with liquid detergent in the "DETERGENT WASH"
chamber or powder products with powder detergent in
the DETERGENT WASH" chamber.
Do not mix liquids and powders.
Use of multi-product (detergent plus softener) sheets
or color-absorbing sheets NOT recommended. They
could disable your machine and result in unwarranted
repair costs.
From time to time you may see water in the "LIQUID
BLEACH" and "FABRIC SOFTENER" chambers. This is
part of the normal operation of the washer.
Liquid Chlorine Bleach z_
- If desired, add liquid chlorine bleach to the cham-
ber labeled "LIQUID BLEACH" and marked with this
symbol z_.
- Fill to the MIN line for small loads or the MAX line
for large loads.
- DO NOT fill above the maximum fill line.
To prevent fabric damage, do not overfill the "LIQUID
BLEACH" chamber or pour liquid chlorine bleach
Liquid Fabric Softener
- If desired, pour the recommended amount of liquid
fabric softener into the chamber labeled "FABRIC
SOFTENER" and marked with this symbol _.
- Fill to the HIN line for small loads or the MAX line
for large loads.
DO NOT fill above the maximum fill line.
To prevent staining, do not overfill the "FABRIC
SOFTENER" chamber or pour liquid fabric softener
directly on the wash load.
6
- Use of a fabric softener-dispensing ball is not rec-
ommended in tumble action washers.
Select the appropriate cycle and settings for
the load.
- Turn the cycle selector knob in either direction to
select the cycle desired.
- Turn the temp knob to select the wash and rinse
temperatures. If the water temperature combina-
tion is not appropriate for that cycle, the status
lights will blink and the signal will beep 3 times.
- The final spin speed and options for each cycle will
be indicated for the cycle selected. See the Wash-
er Settings Chart for more details.
- To change the settings, press the spin and op=
tions buttons to scroll to the desired settings.