Table of Contents
Advertisement
ASSE
LY
iNSTALL
MULCHER
PLATE
(See Figs, 5 and 6)
o
Install two latch hooks to mulcher plate using screw,
washer, tock washer, and weld nut as shown.
NOTE: Pre-assemble
weld nut to latch hook by inserting
weld nut from the top with hook pointing down.
o
Tighten hardware securely.
-
Raise and hold deflector shield in upright position.
o
Place front of mulcher plate over front of mower deck
opening and slide into place, as shown.
o
Hook front latch into hole on front of mower deck.
®
Hook rear tatch into hole on back of mower deck.
_,A,
guard
from
mower,
Raise and hotd
_
guard
when
attaching
rnulcher
plate
_
and a_ow it to rest on plate while in
J
operation.
TO CONVERT
TO BAGGING
OR
DISCHARGING
Simply remove mulcher ptate and store in a safe place.
Your mower is now ready for discharging or installation of
optional grass catcher accessory.
NOTE: tt is not necessary to change blades, The mulcher
blades are designed for discharging and bagging also,
WELD.
NUT
LATCH
HOOK
WASHER
MULCHER
PLATE
WELD NUT
FROM THE TOP\,_,
HOOK POINTS
DOWN
LOCK
WASHER
SCREW
HOOK
LOCK
WASHER
DEFLECTOR
SHIELD
FIG. 5
WELD
NUT
FIG. 6
LATCH
HOOKS
9
Advertisement
Table of Contents
