Table of Contents
Advertisement
ASSEM
LY
CHECK
TRRE PRESSURE
The tires on your tractor were overinflated at the factory for
shipping purposes.
Correct tire pressure is important for
best cutting performance.
Reduce tire pressure to PSI shown in "PRODUCT
SPECIFICATIONS"
on page 3 of this manual.
CHECK
DECK
LEVELNESS
For best cutting results, mower housing should be properIy
leveled,
See "TO LEVEL MOWER HOUSING"
in the
Service and Adjustments
section of this manual.
CHECK
FOR
PROPER
POSITION
OF ALL
BELTS
See the figures that are shown for replacing motion and
mower blade drive belts in the Service and Adjustments
section of this manual.
Verify that the belts are routed
correctly.
CHECK
BRAKE
SYSTEM
After you learn how to operate your tractor, check to see
that the brake is properly adjusted.
See "TO ADJUST
BRAKE" in the Service and Adjustments
section of this
manual.
,/ CHECKMST
BEFORE
YOU OPERATE
AND ENJOY
YOUR NEW
TRACTOR, WE W!SH TO ASSURE THAT YOU RECEIVE
THE BEST PERFORMANCE AND SA TfSFA C TION FROM
THIS QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING
CHECKLIST:
,/
All assembly instructions have been completed.
v"
No remaining loose parts in carton,
v"
Battery is properly prepared and charged.
(Minimum
1 hour at 6 amps).
¢
Seat is adjusted comfortably and tightened securely.
v" All tires are properIy inflated. (For shipping purposes,
the tires were overinflated at the factory).
¢"
Be sure mower deck is properly leveled side-to-side/
front-to-rear
for best cutting results.
(Tires must be
properly inflated for leveling).
,/
Check mower and drive belts. Be sure they are muted
properly around pulleys and inside all belt keepers.
,/
Check wiring. See that all connections are still secure
and wires are properly clamped,
WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY
EXTRA ATTENTION TO THE FOLL 0 WING IMPORTANT
ITEMS:
V
Engine oil is at proper level.
v"
Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
¢"
Become familiar with all controls - their location and
function. Operate them before you start the engine.
v"
Be sure brake system is in safe operating condition.
I0
Advertisement
Table of Contents
