Frigidaire GLEFZ384HCA Use & Care Manual page 10

READ
THE iNSTRUCTiONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with
the various pad functions of the oven as described below.
CLOCK BAKE TiME UP and DOWN ARROW PADS-- Used along BAKE PAD--Used
PAD-- Used PAD-- Used to with the function pads to select oven to select the bake
to set the enter the length of temperature, cook time, start time (when function.
time of da the bakin( time. programming an automatic start time), time of
day, timer.
SPEED CLEAN
(SELF-CLEAN) --
Used to select a
shorter 2 hour Self-
Clean cycle time.
SELF-CLEAN PAD--
• Oven
FEATURE INDICATOR
LIGHTS-- These light to
show which feature is in
use.
o BROIL PAD-- Used to
_ select the variable broil
function.
OVEN LIGHT PAD--
Used to select a longer _j@j@ o Preheat
3 hour Self-Clean O Door Locked _Dg_
TIMER ON/OFF PAD-- START TiME OVEN, PREHEAT & DOOR LOCKED LIGHTS* -- The "OVEN" light
Used to set or cancel the PAD-- Used to set will glow each time the oven turns on to maintain the set oven
minute timer. The minute the desired start temperature. The "PREHEAT" light will glow when the oven is first
timer does not start or stop time for baking & set to operate, or if the desired temperature is reset higher than the
cooking. Also, Self-Clean. May be actual oven temperature. The "DOOR LOCKED" light will flash
TIMER ON/OFF pad is used used with BAKE when the oven door locks and unlocks or when using the Self-
to set the Continuous Bake TIME to program a Clean cycle or the oven door lockout is activated.
feature, delayed bake cycle.
Used to turn the interior
oven light ON or OFF.
CLEAR/OFF PAD-- Used
to clear any function
previously entered
except the time of day
and minute timer. Press
CLEAR/OFF to stop
cooking. Also the CLEAR/
OFF pad is used to
activate oven door
lockout setting.
*Note:The OVEN indicator light on the electronic display
wi!! tumON and OFF when using the Bake feature and
during preheat. This is norma! and indicates that the oven is
cycling to maintai n th e selected baking temperature: When
the preheat indicator light turns OFF, your oven is ready.
For a silent control panel
When choosing a function, a beep will be heard each time a
pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold @. After 7 seconds,
the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press
and hold @ again for 7 seconds until the control beeps
once.
Temperature conversion
The electronic oven control is set to operate in °F
(Fahrenheit) when shipped from the factory. The oven can
be programmed for any temperature from 170°F to 550°F
(77°C to 287°C).
To change the temperature to °C (Celsius) or from °C
to °F (control should not be in a Bake or Clean mode):
1. Press _. "----" appears in the display.
2. Press and hold the ,_ until "HI" appears in the
display.
3. Press and hold _ until °F or °C appears in the
display.
4. Press the ,1_ or V to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating
mode.
senmg Ov n cont,.o
Note: The time Ofday must first be set in order to operate the 0venl
To Set the Clock
When the range is first plugged in, or when the power
supply to the range has been interrupted, the display will
flash "12:00".
once (do not hold pad down).
1. Press
.
10
Within 5 seconds, press and hold the ,/_ or V until
the correct time of day appears in the display.
Note: The clock cannot be changed during any timed
bake or Self-Clean cycle.