Frigidaire PLGFMZ98GCA Use & Care Manual page 32

TheSPEED CLEAN _, CLEAN _9 &MAXX CLEAN _ padsareused tostarta Self-Cleaning cycle. W henusedwith
START TIME_ pad, a delayed Self-Cleaning cyclemayalsobeprogrammed. Thisfeature allows foranySelf-Cleaning
cycletimes from2 hours(using Speed Clean), 3 hours(using Clean) t o4 hours(using MaxxClean).
During theSelf-Cleaning cycle, t heoutside oftherange canbecome veryhottothetouch. D ONOTleave
small c hildren unattended neartheappliance.
DONOT forcetheovendooropen.Thiscandamage theautomatic d oorlocking system. U secarewhen
opening theovendooraftertheSelf-Cleaning cycle.Stand tothesideoftheoven whenopening thedoortoallowhotairor
steam to
escape. The oven may still be VERY HOT.
INSTRUCTIONS PRESS DISPLAY
To start an immediate Self-Cleaning cycle or to set a delay
start time of 9:00 o'clock and shut off automatically (example
provided is a default 3 hour Self-Clean cycle):
1. Be sure the clock is set with the correct time of day, the oven is
empty and the oven door is closed.
2. Press _. "CLEAN" will flash, "3:00" (hours) and the Cooktop
locked icon will show in the display (See Fig. 1). Note: 2 hours
of Self-Cleaning time may be choosen by pressing @ or 4
hours by pressing the @ at this time.
3. Press O .The "DOOR LOCKED" icon will flash; "CLEAN",
Cooktop Lockout icon and the letters "CLn" will remain on in
the display (Fig. 2).
4. As soon as the control is set, the motor driven oven door lock
will begin to close automatically. Once the door has been
locked the "DOOR LOCKED" indicator light will quit flashing
and remain on. The Cooktop locked icon will remain on (Fig. 3).
or
@,@optional.
@
Fig. 1
Fig. 2
Fig. 3
NOTE: If the optional delay Self-Clean feature is needed, finish steps 5-7. If Self-Clean is started immediately skip the remaining
steps and continue with "When the Self-Clean cycle is done" on the following page.
5. Press _ (See Fig. 4). Enter the desired Self-Clean starting
time using the number pads _ @ @ (See Fig. 5).
6. PressO. "DELAY", "DOOR LOCKED", "CLEAN"and
Cooktop locked icons will remain on.
7. The control will calculate forward from the set start time to
determine when the Self-Cleaning cycle should end. The Self-
Cleaning cycle will turn on automatically at the set time. At that
time the icon "DELAY" will go out; the oven icon will come on,
the start time, Cooktop locked icon, "CLEAN" and "CLn" will
remain in the display (See Fig. 6).
©
G@@
0
32
Fig. 4
Fig. 5
Fig. 6