Frigidaire FAM156R1A2 Use & Care Manual page 6

Air Conditioner Features
(continued)
TO CHANGE TEMPERATURE
SETTING:
YOU WILL SEE:
Remote
Sensing
DO THIS:
PRESS TO
RAISE
PRESS TO
LOWER
Note: Tap or hold either up (A) or down (V) button until the desired temperature is seen on the display. This temperature will be automati-
cally maintained anywhere between 60°F (16°C) and 90°F (32°C) for cooling mode. The temperature will be automatically maintained anywh-
ere between 55°F (13°C) and 80°F (27°C) for heating mode. If you want the display to read the actual room temperature. See "To Operate
on Fan Only" section on Page 7.
TO ADJUST FAN SPEEDS:
Cood
DO THIS:
PRESS
TO SELECT
FASTER
SLOWER
YOU WILL SEE :
Press the Fan Faster button will increase the fan speed from Low (LO), to Medium (ME), to High (HI). The digital display will indicate
your chosen speed. Press the Fan Slower button will decrease the fan speed from High (HI), to Medium (ME), to Low (LO).The digital display will
indicate your chosen speed.After 5 seconds the display will revert back to the set temperature.
TO USE AUTO TEMP FEATURE:
LIGHT On
DO THIS:
PRESS
AUTO TEMP
YOU WILL SEE:
Note: Fan speed starts at High Speed and adjusts to a slower speed as the room temperature dictates, For example if the room doesn't
get too warm, it will stay at the slowest speed. If the room temperature rises quickly, such as a door being opened, it will automatically go
to the highest speed. The fan speeds will re-adjust back to the slowest speed as the room returns to the original set temperature.