Setting Cooling Temperatures - Frigidaire FGHS2332LE3 Use & Care Manual

LCD
User Interface
Your refrigerator is equipped with a user interface display.
It is only necessary to touch the glass. There is no need
to press with force.
Touch an icon (Water/Cube/Crush) to activate the
desired dispenser mode.
light on=off On / Off
control lock
filter reset
Press and hold for three (3) seconds
to activate and deactivate. The
Lock icon will be displayed in the
LCD window. This restricts unde-
sired changes to the refrigerator's
settings and prevents use of the ice
and water dispenser.
Touch to display filter condition
status. Press and hold for three (3)
seconds to reset.
Pressing the power off icon does not turn off power to
your refrigerator, You must unplug the power cord from
the wall outlet: .........................................................................................
Setting Cooling Temperatures
Press set temp to choose which compartment,
refrigerator or freezer, to adjust. The temperature display
will begin to blink with the first touch. Touch button next
to + or - to adjust the temperature to the desired setting.
After five (5) seconds of inactivity, the display will beep to
accept the new temperature.
C/F
Touch to toggle display from Fahr=
enheit to Celsius.
power on=off Press and hold for three (3) seconds
to turn off the cooling system to
clean the refrigerator. It also turns
off all dispenser functions, The tem-
perature display will read OFF.