Frigidaire FGF368GQJ Use & Care Manual page 7

READ THE INSTRUCTIONS CAREFULLY BEFORE U SING THE OVEN. F or s atisfactory useofyouroven, become f amiliarwith
thevarious padfunctions o ftheovenasdescribed b elow.
CLOCK PAD-- Used
to set the time of day.
TIMERON/OFF
PAD-- Used to set or
BAKE TIME UP and DOWN ARROW PADS-- Used along FEATURE INDICATOR LIGHTS-
PAD- Used to with the function pads to select oven These light to show which feature
enter the length of temperature, cook time, start time (when is in use.
the baking time. programming an automatic start time), time BAKE PAD--Used
, of day, clean time and minute timer. / // to select the bake
BROIL PAD-- Used to
select the variable broil
® • • Oven ®
OVEN, PREHEAT & DOOR LOCKED LIGHTS* -- The "OVEN" light
will
glow
each time the oven turns on to maintain the set oven
temperature. The "PREHEAT"
light will glow
when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual
oven temperature.
The "DOORLOCKED"
light
willflash
when the oven door locks and unlocks or when
using
the Self-
Clean
cycle or
the oven door lockout is activated.
cancel the minute
timer. The minute timer
does not start or stop
cooking. Also,
TIMER ON/OFF pad is
used to set the
Continuous Bake
feature.
START TIME PAD-- Used
to set the desired start time
for baking & Self-Clean.
May be used with BAKE
TIME to program a delayed
bake cycle.
SELF-CLEAN PAD--
Used to select the Self-
Cleaning cycle. A 2 or 3
hour Self-Clean time may
be selected.
CLEAR/OFF PAD-- Used to clear
any function previously entered
except the time of day and minute
timer. Press CLEAR/OFF to stop
cooking. Also the CLEAR/OFF pad
is used to activate oven door lockout
setting.
,N0te:The OVEN indicat0r light On the electronic display
will turn ON & OFF when using the Bake feature &during
preheat. This is normal& indicates that the oven !s cycling
to maintain the selected baking temperature: When the
preheat indicator light turns OFF, Y0ur oven !s ieady
Temperature conversion
The electronic oven control is set to operate in °F
(Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C
to287°C).
For a silent control panel
When choosing a function, a beep will be heard each time a
pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold @. After 7 seconds,
the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press
and hold @ again for 7 seconds until the control beeps
once.
To change the temperature to °C (Celsius) or from °C to
°F (control should not be in a Bake or Clean mode):
1. Press_. " "appears in the display.
2. Press and hold the /_ until "HI" appears in the
display.
3. Press and hold _ until °F or °C appears in the
display.
4. Press the /_, or V to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating
mode.
Setting Oven Controls
Note: The time of day must first be set in order to operate the oven.
NOTE: To turn the time of day display OFF or ON in the display press _ and hold for t5 seconds (the control will beep
once) and then release. This feature does not remove the set time of day from the memory of the control. When the display
is turned OFF the time of day will re-appear for a few seconds any time the _ pad is touched.