Pars & Features; Parts And Features - Craftsman 921.153101 Owner's Manual

Parts & Features
See figures below for reference,
I AW Intake Rlter 1
Provides clean elf to the pump and must always be kept free of debris. Check on a daily basis or before each use.
Outlet Tube
on Fill Cap
Regulator Gauge 1
Indicates the outgoingair pressure to the tool and is controlled
by the regulator.
Tank Preemui'eGauge |
indicatesthe reserve air pressure in the tank.
- _ 7- .
Pressure 8wlt_ . . _
This controlsthe power to the motor aJ_d.al_e.--'.:_
cut4n/cut-out pressure settings. This switch .served"1
the AkRo-OniOffpositionsfor the unit, J
= Valve
The pressure relief valve located on the
side of the pressure switch, is designed to
automa,bcally release compressed air when
the air compressor reaches cut-out pressure,
The released air shouJd only escape
momentarily and the valve shouldthen dose.
t Valve
Used to allow excess tank pressure to
e_pe into the atmosphere, This valve
should only open when the tank preastJre
is above the maximum rated pressure.
Regutatcr '_
The air pressure coming from the air tank is |
con_olled by the regulator, To increasu the |
pressure turn the le_ob clePJxwiee a nd to |
decrease the pressure turn the knob _
|
Pressure counterdockw;su.
J
Relief Tube
Quick Connect 1 Offers • quick release feature for sttashtng and removing the air hose,
l Tank DraIn Valve 1
011Sight Gatiga Used to drsJnoundensation from the a=rtank, Located st bottom of tank.:
I Check valv_ 1
When the pump is not in operation the valve €losests retzdn=drpressure in,;de the tank, An internal component.