Download Print this page

Fisher & Paykel E522B Installation Instructions And User Manual page 8

Ice & water refrigerator

Advertisement

Available languages

Available languages

Installation
instructions
Installation
instructions:
1
Ensure that refrigerator
is not plugged
into a power supply.
2
Locate a cold water supply/feed
only suitable for a water
connection.]ee
& tap fitting is not suppled.
If you can't find
the connection
faucet, contact an authorized
plumber
in
your state or town to fit your water connection.
s
Connect the 8" (200 ram) blue tubing
to the outlet of the
PRV (blue collet) and the inlet connection
of the water filter
cartridge
as shown in Diagram
1. Gently pull on both ends
to ensure it is locked.
4
Connect the white ¼"(6 ram) tubing to the outlet of the
water filter cartridge
as shown in Diagram 2. Gently pull to
ensure it is locked.
5
Measure the required length of tubing to run from the PRV
to the water connection
point.
6
Cut the tubing
making
sure the ends are square and dean.
7
Connect the tubing
to the faucet connection
and the base
of the PRV (white toilet) and then to the faucet as shown
in Diagram 3. Please note that the faucet connection
supplied should fit most installation
situations.
If your
faucet requires a different
fitting,
please contact
an
authorized
plumber
in your state or town to purchase
the correct fitting.
s
Connect one locking key to each side of the water
filter cartridge
in between
the cartridge
and the
locking collet as shown in Diagram 4.
To flush the water filter and check for leaks, aim the
end of the tubing
into a bucket, turn isolating faucet
on and run at least 3 qt (3 L) of water through.
Once
complete,
turn isolating faucet off.
lo
Locate desired position for water filter noting carefully the
following
points:
It is recommended
to fit the water filter in a vertical
orientation
with the water filter head at the top. This will
minimize
water leakage when replacing
cartridge.
Ensure the filter is in a convenient
location to access
every 6 months for replacement.
We suggest that
this location is beside the water filter supply faucet in
a cupboard
beside the refrigerator.
A minimum
clearance of 2 V£' (64 ram) from the
bottom
of the filter cartridge
is required to perform
cartridge
removal.
Do not screw water filter to refrigerator.
Diagram 2
Fig4 Waterline connection
to reg_igemtor
t
Diagram 3
F-ig.5Faucetconnection

Advertisement

loading

This manual is also suitable for:

Rf201aActive smart e522bActive smart rf201a