Table of Contents
Advertisement
_
WARNING!
Read all instructions. Failureto follow
all instructions listed below may result fn electric
shock, fire and/or serious tnlury_ The term "power
toot" in all of the warnings listed below refers to your
mains-operated
(corded} power too! or battery-oper-
ated (cordless) power tool.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY
[] Keep work area clean and well lit. Cluttered or dark
areasinvite accidents_
ml Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids,gases or dust. Powertools createsparks
whichmay ignitethe dustor fumes_
[] Keep children and bystanders away while operat-
ing a power tool. Distractions can causeyouto lose
control,
ELECTRICAL
SAFETY
n Power tool plugs must match the outleL Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified piugs and matching outlets will reduce
risk of electric shock
[] Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an Increased risk of electric shock tf your body
is earthed or grounded,,
[] Do not expose power tools to rain orwet condi-
tions, Water entering a power tool will increase the risk
ul e_ectfic shock,
w Do not abuse the cord, Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts.
Damaged or entangled cords increase the risk
o'_elecl]tic shock.
[] When operating a power too! outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
[] Use battery only wffh charger listed.
MODEL
315.1!5810
BATTERYPACK
CHARGER
1302790D3
Mode] No. 1425301
130279005
(itemNo. g_11041)
(item No°9_11375) Mode_l N o. 315_115730
(item No. 140301003)
PERSONALSAFETY
[] Stay alert,watch what you are doing and use
commonsensewhen operaPJng a powertool Do
not usea power tool while you are tired or under
the influenceof drugs, alcohol or medication, A
moment of inattention whileoperating powertools may
result in serious persona!in'}ury_
El Use safety equipment. Always wear eye protection.
Sa_eti equipment such as d_
mask, non-skid safety
shoes, hard hat, or hearing protection used for appro-
priate conditions wi[_ reduce personal i_juries_
ta Avoid accidental
starting. Ensure the switch is in
the off-position before plugging in. Carrying power
tools with your finger on the switch or plugging in
power tools that have the switch on invites accidents.
[] Remove any adjusting
key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
tnturyo
m Do not overreach.
Keep proper footing and balance
at all times. This enables better con!to{ of the power
too}in unexpected situations°
IE Dress properly. Do not wear loose clothing or jew-
elry. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewelry, or long hair can
be caught in moving parts.
[] if devices are provided for the connection of dust
extraction
and collection facilities, ensure these are
connected and properly used. Use of these devices
can reduce dust-related hazards.
[] Do not wear loose clothing or jeweJry, Contain long
hair. Loose clothes, Jewetry, or long hair can be drawn
into air vents.
m Do not use on a ladder or unstable support. Stable
footing on a soitd surface enabJes better control of the
power too! in unexpected situations,,
POWER TOOL USE AND CARE
[] Do not force the powertool. Use the correctpower
tool for your application.The correct powertool wiU
do the jobbetter and sa_erat the rate for whichit was
designed.
i1 Do not use the power tool if the switch does not
turn it on and off, Any powertool thatcannotbe
controlled withti_eswitch is dangerousand must be
repaired.
[] Disconnectthe plug from the power source and]or
the battery pack from the power too_before making
any adjustments,changingaccessories, or storing
power tools, Suchpreventive safety measuresreduce
the risk of starting the power toolaccidentally,
[] Store idle power tools out of the reach of children
and do not allow persons unfamiliarwith the power
tool or these instructionsto operate the powertool.
Powertooisare dangerous in the handsof untrained
users,,
[] Maintain power tools. Check for misalignment or
bindingof moving parts, breakage of parts, and any
other condition that may affect the power tool's
operation,if damaged, havethe power toot repaired
before use. Manyaccidents arecaused by poorly
maintained powe_tools.
Im Keep cutting toots sharp and clean, Property main-
tained cutting toots with sharp cuttingedges are less
likely to bind and are easierto control
Advertisement
Table of Contents
