Craftsman 917.28856 Operator's Manual
Craftsman 917.28856 Operator's Manual

Craftsman 917.28856 Operator's Manual

24.0 hp 42" mower electric start automatic transmission
Hide thumbs Also See for 917.28856:

Advertisement

Available languages

Available languages

Operator's
Manual
1
®
LAW
24.0 HR*
TRACTO
42" Mower
Electric Start
Automatic
Transmission
Model No.
917.28856
• Espafiol,
p. 34
This product has a low emission
engine
which
operates
differently
from
previously
built
engines.
Before
you start the
engine,
read and understand
this Operator's
Manual.
IMPORTANT:
Read and follow all Safety
Rules and Instructions
before
operating
this equipment.
For answers to your questions
about this product, Call:
1-800-659-5917
SEARS Craftsman
Help Line
5 am - 5 pm, Mon- Sat
Gasoline
containing
up to 10% ethanol
(EIO) is acceptable
for use in this machine.
The use of any gasoline exceeding
10% ethanol
(EIO) will void the product warranty.
Esta maquina
puede utilizar
gasolina con un contenido de hasta el 10% de etanol
(EIO).
El
uso de una gasolina que supere
el 10% de etanol
(EIO) anular_ la garantia
del producto.
Sears
Brands
Management
Corporation,
Hoffman
Estates,
IL 60179
U.S.A.
Visit our Craftsman
website:www.sears.com/craftsman
*As rated
by the engine
manufacturer
446211

Advertisement

Table of Contents
loading

Summary of Contents for Craftsman 917.28856

  • Page 1 10% de etanol (EIO). uso de una gasolina que supere el 10% de etanol (EIO) anular_ la garantia del producto. Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman website:www.sears.com/craftsman *As rated by the engine manufacturer 446211...
  • Page 2: Lifetime Limited Warranty

    For warranty coverage details to obtain free repair or replacement, call 1-800-659-5917 or visit the web site: www.craftsman.com In all cases above, if part repair or replacement is impossible, the riding equipment will be replaced free of charge with the same or an equivalent model.
  • Page 3: General Operation

    ,_DANGER: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. _,WARNING: In order to prevent acciden- • Never direct discharged materialtoward tal starting when setting up, transporting, anyone.
  • Page 4: Slope Operation

    li. SLOPE OPERATION • Keep children out of the mowing area and in the watchful care of a responsible Slopes are a major factor related to loss of adult other than the operator. control and tip-over accidents, which • Be alert and turn machine off if a child...
  • Page 5 • Remove gas-powered equipment from • Nevertamperwithsafetydevices. Check the truck or trailer and refuel it on the their proper operation regularly. ground. Ifthis is not possible, then refuel • Keep machine free of grass, leaves, such equipment with a portable container, other debris...
  • Page 6: Product Specifications

    60 Oz./1,77 REPAIR PROTECTION AGREEMENTS Spark Plug: Champion QC12YC (Gap: .040"/1.02 Congratulations on making a smart pur- chase. Your Craftsman® product Ground Speed Forward: 0 - 5.2/8,4 (Mph/Kph): Reverse: 0 - 2.9/4,7 designed manufactured years dependable operation. But like all products,...
  • Page 7: Tools Required

    Slope Sheet Keys (2) Keys Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. TOOLS REQUIRED ASSEMBLY A socket wrench set will make assembly easier. Standard wrench sizes are listed. (1) 1/2"...
  • Page 8 ,/CHECKLIST NOTE: You may now roll your tractor off the Before operate your tractor, skid. Followthe appropriate instruction below wish to assure that receive best to remove the tractor from the skid. performance satisfaction from this Quality Product. _l_ WARNING: Before starting, read,...
  • Page 9 These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. I',,I @ REVERSE NEUTRAL HIGH CHOKE FAST SLOW IGNITION SWITCH (@) -@ MOWER LIFT ENGINE OFF REVERSE ENGINE ON ENGINE START PARKING BRAKE MOWER...
  • Page 10 KNOW YOUR TRACTOR READ THIS MANUAL SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations various controls and adjustments. Save this manual for future reference. 03108 Our tractors conform to the applicable safety standards of the...
  • Page 11 The operation of any tractor result in foreign objects thrown into I the eyes, which can result in severe eye damage. Always wear safety ! glasses or eye shields while operating your tractor or performing any ! adjustments or repairs. We recommend standard safety glasses or a_...
  • Page 12 TO USE CRUISE CONTROL NOTE: Adjust gauge wheels with tractor The cruise control feature can be used for a flat level surface. forward travel only. 1. Adjust mower to desired cutting height SYSTEM CHARACTERISTICS (See "TO ADJUST MOWER CUTTING cruise control should only...
  • Page 13 TO TRANSPORT REVERSE OPERATION SYSTEM (ROS) Your tractor is equipped with a Reverse When pushing or towing your tractor, Operation System (ROS). attempt sure to disengage transmission by placing the operator to travel in the reverse direction freewheel control in freewheeling position.
  • Page 14: To Start Engine

    BEFORE STARTING THE ENGINE Sit on seat in operating position, depress brake pedal and set parking brake. CHECK ENGINE OIL LEVEL Move attachment clutch to disengaged The engine in your tractor has been shipped, position. from the factory, already filled with summer Move throttle control...
  • Page 15: Mowing Tips

    PURGE TRANSMISSION MOWING TiPS • Tire chains cannot be used when _CAUTION: Never engage or disengage freewheel lever while the engine is running. mower housing is attached to tractor. To ensure proper operation and performance, • Mower should be properly leveled it is recommended that the transmission...
  • Page 16 MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE SCHEDULE EACH SEASON STORAGE HOURS HOURS HOURS HOURS Check Brake Operation Check Tire Pressure Check Operator Presence & ROS Systems Check for Loose Fasteners ChecWReplace Mower Blades Lubrication Chart Check Battery Level Clean Battery and Terminals...
  • Page 17 TRACTOR CHECK REVERSE OPERATION (ROS) SYSTEM Always observe safety rubs when per- forming any maintenance. • When the engine is running with the BRAKE OPERATION ignition switch in the engine "ON" posi- tion and the attachment clutch engaged, if tractor requires more than five (5) feet to any attempt...
  • Page 18: Engine Oil

    TO CLEAN BATTERYAND TERMINALS NOTE: Although multi-viscosity oils Corrosionand dirt on the battery and termi- (5W30, 10W30 etc.) improve starting nals can causethe batteryto "leak" power. cold weather, they will result in increased 1. DisconnectBLACK battery cable first oil consumption when used above then RED battery cable and remove...
  • Page 19 AIR FILTER CLEAN AIR INTAKE/COOLING AREAS To insure proper cooling, make sure the Your engine will not run properly using grass screen, cooling fins, and other exter- dirty air filter. Clean the foam pre-cleaner nal surfaces of the engine are kept clean after every 25 hours of operation...
  • Page 20 CLEANING • Clean engine, battery, seat, finish, etc. Nozzle _.,.IHose of all foreign matter. Adapter _ Washout Port • Clean debris from steering plate. Debris can restrict clutch/brake pedal shaft movement, causing belt slip and loss of drive. A CAUTION: Avoid all pinch points and movable parts...
  • Page 21 WARNING: VICE OR ADJUSTMENTS: TO AVOID SERIOUS INJURY, BEFORE PERFORMING SER= Depress brake pedal fully and set parking brake. Place attachment clutch in "DISENGAGED" position. Turn ignition key to "STOP" and remove key. Make sure the blades and all moving parts have completely stopped.
  • Page 22 ATTACH MOWER SIDE SUSPENSION Insert of link (E) into hole in front ARMS (A) TO CHASSIS - Position hole mower bracket secure with in arm over pin (B) on outside of tractor washer and retainer spring (J). chassis and secure with retainer spring.
  • Page 23 FRONT=TO=BACK ADJUSTMENT TO LEVEL MOWER Make sure tires are properly inflated to the IMPORTANT: Deck must be level side- PSI shown on tires. Iftires are over or under to-side. inflated, it may affect the appearance of your lawn and lead you to think the mower is not To obtain the best cutting results, the mower...
  • Page 24 TO REPLACE MOWER BLADE DRIVE BELT INSTALLATION BELT Install new belt from tractor rear to front, The mower blade drive belt may be replaced over steering plate (F) and above without tools. Park the tractor on level sur- clutch brake pedal shaft (G).
  • Page 25 TO CHECK BRAKE TO START ENGINE WITH A WEAK BAT- TERY If tractor requires more than five (5) feet to stop at highest speed in highest gear on a _IbWARNING: Lead-acid batteries generate level, dry concrete or paved surface, then explosive gases.
  • Page 26: Interlocks And Relays

    REPLACING BATTERY TO REMOVE HOOD GRILL SEMBLY _,WARNING: Do not short battery termi- Raise hood. nals by allowing a wrench or any other object Unsnap headlight wire connector. to contact both terminals at the same time. Stand in front of tractor. Grasp hood at Before...
  • Page 27 Immediately prepare your tractor for storage • Empty the fuel tank by starting the engine at the end of the season or if the tractor will and letting it run until the fuel lines carburetor are empty. not be used for 30 days or more, _WARNING: Never store the tractor with •...
  • Page 28: Troubleshooting

    TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center. PROBLEM CAUSE CORRECTION Will not start Out of fuel. Fill fuel tank. See "TO START ENGINE" Engine not "CHOKED" properly. Operation section. Wait several minutes before Engine flooded. attempting to start.
  • Page 29 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center. CAUSE PROBLEM CORRECTION Cutting too much grass/too fast. Raise cutting height/reducespeed Loss of power Throttle in "CHOKE" position. Adjust throttle control. Clean underside of mower Build-up of grass, leaves and trash under mower.
  • Page 30 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center. PROBLEM CAUSE CORRECTION Mower blades will Obstruction in clutch mechanism. Remove obstruction. not rotate Worn/damaged mower drive belt. Replace mower drive belt. Frozen idler pulley. Replace idler pulley. Frozen blade mandrel.
  • Page 31 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center. PROBLEM CAUSE CORRECTION Loss of drive Place freewheel control in Freewheel control in "ENGAGED" position. "DISENGAGED" position. See "CLEANING" in the Debris on steering plate (if maintenance section.
  • Page 32 SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION I/v_ ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL 15 DEGREES MAX. down the face of slopes, never across the face. Do not mow ARNING: To avoid serious injury, operate your tractor up and slopes greater than 15 degrees.
  • Page 33 Ilame al 1-800-659-5917 6 visite el sitio web: www. craftsman.com En todos los casos anteriores, si el reemplazo es imposible, el equipo tractor ser& sustituido sin cargo con el mismo modelo o uno equivalente.
  • Page 34 _,PELIGRO: Esta Maquina cortadora es capaz de amputar las manosy los pies y de lanzar objetos, si no se observan las instrucciones de seguridad siguientes se pueden producir lesiones graves o la muerte. • No maneje la m&quina si no tiene la trampa _bADVERTENCIA: Siempre desconecte el alam- para cesped completa, la canaleta de descarga...
  • Page 35 • Escogeruna velocidadde marchabaja de • Tenet el maximo cuidado cuando se acerca modo quenoseanecesario pararse o cambiar a cantos ciegos, arbustos, arboles u otros estando en unapendiente. objetos que pueden impedir la vista de niflos. • Nocortar lahierba mojada. Lasruedas pueden IV.
  • Page 36 OPERAClONES DE SERVIClO GENERALES • Nunca hacer funcionar la m&quina en un &rea • Si se golpea un objeto ajeno, hay que pararse cerrada. e inspeccionar la m&quina. Reparar, si es necesario, antes de volver a poner en marcha. • Mantener todas las tuercas y pernos apretados para asegurarse de que trabaja en condiciones •...
  • Page 37: Especificaciones

    LA REPARACION Velocidad de Marcha Congratulaciones por su buena compra. Recarrido Adelante: 0 - 5.2/8,4 nuevo producto Craftsman® est& diseSado (Mph/Kph): Atr&s: 0- 2.9/4,7 fabricado para funcionar de modo fiable muchos aSos. Pero como todos los productos, Sistema de 3 Amps Bateria...
  • Page 38: Herramientas Necesarias Para El Montaje

    Llaves Hoja de pendiente Llaves Su tractor nuevo ha sido montado en la fabrica con la excepci6n de aquellas partes que no se han montado por razones de envio. HERRAMIENTAS NECESARIAS PARA EL MONTAJE Un juego de Ilaves de tubo facilitara el montaje. A continuaci6n se enumeran los tamaflos de las Ilaves estandar.
  • Page 39 AVISO: Ahora puede rodar o conducir su tractor tfLISTA DE REVISION fuera de la corredera. Siga las siguientes instruc- Antes de operar y de disfrutar de su tractor nuevo, ciones para remover el tractor de la corredera. le deseamos que reciba el mejor rendimiento y la _ADVERTENClA: Antes de empezar, leer, en- mayor satisfaccion...
  • Page 40 Estos simbolos pueden aparecer sobre su tractor o en la literatura proporcionada con el producto. Aprenda y comprenda sus significados. MARCHA ATR,_S NEUTRO ALTO BAJO ESTRANGU- R_,PIDO LENTO LACION MOTOR MOTOR MOTOR FRENO ALTUFIA DE LA LEVANTAMIENTO SlSTEMA APAGADO ENCENDIDO ENMARCHA ESTACIONAMIENTO SEGADORA...
  • Page 41 FAMILIARICESE CON SU TRACTOR LEA ESTE MANUAL LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU TRACTOR Compare las ilustraciones con su tractor para familiarizarse con las ubicaciones de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. 03108 Nuestros tractores cumplen con los est_.ndares de seguridad del American National Standard Institute.
  • Page 42 La operaci6n de cualquier tractor puede hacer que salten objetos extraflos _" As"_E°_0S_E _ dentro de sus ojos, Io que puede producir daflos graves en estos. Siempre use anteojos de seguridad o protecciones para los ojos rnientras opere su tractor o cuando haga ajustes o reparaciones.
  • Page 43 UTILIZAR EL MANDO CRUCERO PARA AJUSTAR LAS RUEDAS CAUBRA= DORAS El mando crucero se puede utilizar s61o durante la marcha hacia adelante. Las ruedas calibradoras est&n bien ajustadas cuando se encuentran un poco a distancia CARACTERiSTICAS T#:CNICAS terreno al mismo tiempo que la segadora este a El control de velocidad crucero s61o debe usarse la altura de corte deseada.
  • Page 44 PARA TRANSPORTAR Cuando empuje o arrastre su tractor aseg0rese de desenganchar la transmisi6n poniendo control de la rueda Iibre en la posici6n de marcha de rueda libre. El control de marcha de rueda Iibre esta situado en la barra de tracci6n trasera del tractor.
  • Page 45 ANTES DE HACER ARRANCAR EL PARA HACER ARRANCAR EL MOTOR MOTOR AI hacer arrancar el motor por la primera vez o si se ha acabado el combustible del motor, se REVISE EL NIVEL DE ACEITE DEL MOTOR necesitara tiempo para e! arranque extra para El motor en su tractor ha sido enviado desde la mover el combustible...
  • Page 46 CONSEJOS PARA SEGAR • Los accesorios pueden ser utilizados durante el periodo del recalentamiento del motor despues • No se pueden usar las cadenas para las Ilantas que la transmisi6n halla sido calentada. cuando la caja de la segadora est& adjunta al AVlSO: Si se encuentra a mucha altura (sobre...
  • Page 47: Antes De Cada Uso

    PROGRAMA ANTES CADA CADA CADA CADA CADA MANTENIMIENTO CADA USO TEMPORADA ALMACENAMIENT( HORAS HORAS HORAS HORAS Revisar la operaci6n del freno Revisar la presi6n de las Ilantas Verifi6z la commande de presence d'operateur et le sistema d ROS Revisar si hay sujetadores sueltos Afilar/cambiar las cuchillas...
  • Page 48 • Cuando el motor est& en marcha con el inte- TRACTOR rruptor de Ilave del sistema de funcionamiento Siempre observe las reglas de seguridad cuando atr&s (ROS) en la posici6n "ON" y el embrague de mantenimiento. del accesorio conectado, cualquier tentativa del OPERAClON DEL FRENO operador de viajar marcha atr&s, NO apagar&...
  • Page 49 Revise el nivel del aceite del carter antes de Cubra los terminales con grasa o parafina. Reinstale la bateria (Yea "Reemplazar arrancar el motor y despues de cada ocho (8) Bateria" en la secci6n de Servicio y ajustes horas de uso continuado. Apriete la tapa del de este manual).
  • Page 50 FILTRO DE AIRE MMPIEZA DE LA ENTRADA DE AIRE/AREAS Su motor no va a funcionar en forma adecuada DE ENFRIAMIENTO si usa un filtro sucio. Limpie el elemento Para asegurar un enfriamiento adecuado, prefiltro de espuma despu@s de cada 25 horas aseg0rese que la rejilla del c@sped, las aletas de operaci6n o cada temporada.
  • Page 51 LiMPIEZA Eche hacia atr&s la abrazadera de cierre del adaptador de la boquilla y empuje este en el • Limpie todo material extraflo del motor, la puerto de lavado de la cubierta en el extremo bateria, el asiento, el pulido, etc. izquierdo de la cubierta de la segadora.
  • Page 52 ADVERTENCIA:PARA EVITAR LESI6NES SERIAS, ANTES DE DAR CUALQUIER SERVICIO O DE HACER AJUSTES: Presione el pedal de freno completamente y aplique el freno de estacionamiento. Ponga el embrague del accesorio en la posici6n desenganchado (DISENGAGED). Ponga la Ilave de ignici6n en la posici6n de apagado (STOP) y remuevala. AsegOrese que las cuchillas y que todas las partes movibles se hayan detenido comple- tamente.
  • Page 53 Realice el mismo procedimiento en el otro lado del tractor. Retire el resorte de sujeci6n (K), desIice la FIJE LAS PIEZAS DE PROPULSION POS- abrazadera (L) hasta quitarIa, y saque TERIORES (C) - Levante la parte posterior presi6n la guia de la caja (P) hasta que se de la cortadora, ubique [a ranura de [a pieza salga del soporte.
  • Page 54 PARA NIVELAR LA SEGADORA Vuelva a verificar las medidas y ajuste nueva- mente, en caso necesario, hasta que ambos Aseg0rese de que los neum&ticos esten inflados lados queden iguales. a la PSI que se indica en estos. Si est&n de- AJUSTE DE DELANTE A ATR,_S masiado inflados o poco inflados, el cesped no le...
  • Page 55 PARA CAMBIAR LA CORREA DE IMPULSION MONTAJE DE LA CORREA DE LA CUCHILLA SEGADORA Instale la correa nueva de la parte de atrfis La correa de impulsi6n de la cuchilla segadora a la parte de adelante del tractor, pasfindola se puede cambiar sin herramientas. Estacione el por encima de la placa de direcci6n (F) y del tractor en una superficie...
  • Page 56 PARA HACER ARRANCAR EL MOTOR CON CONTROLAR Y AJUSTAR EL FRENO UNA BATERiA BAJA Si el tractor exige m&s de cinco (5) pies para _,DVERTENClA: Las baterias de &cido-plo- pararse a una velocidad m&s alta en e! cambio mo generan gases explosivos.
  • Page 57 PARA REMOVER EL CONJUNTO DEL CAPO REEMPLAZAR LA BATERIA Y DEL ENREJADO _DVERTENCIA: No haga cortocircuito con los Levante el cap6. terminales de la bateria al permitir que una Ilave Desabroche el conector del alambre de las de tuerca o cualquier otto objeto entre en contacto luces delanteras.
  • Page 58 Inmediatamente prepare sutractorparael alma- • Vaciar el dep6sito del carburante poniendo en cenamiento a lfinaldelatemporada o si eltractor marcha el motor y dejandolo funcionar hasta noseva a usarpor30 diaso m&s. que el carburante termine el carburador este vacio. _ADVERTENCIA:Nuncaalmacene el tractor congasolina enel estanque dentrodeunedificio •...
  • Page 59 IDENTiFICACION DE PROBLEMAS: Yea la secci6n apropiada en el manual a menos que este dirigido a un centro de servicio Sears. PROBLEMA CAUSA CORRECCK_N Sin combustible. Llene et estanque de combustible. arral3ca Motor sin Ia"ESTRANGULACION" Vea"PARA HACER ARRANCAR EL MO- (CHOKE) adecuada.
  • Page 60 IDENTIFICACI(DN DE PROBLEMAS: Yea la secci6n apropiada en el manual a menos que este dirigido a un centro de servicio Sears. CORRECClON PROBLEMA CAUSA P_rdida de Agua en el combustible. Vaciar etestanquede combustibtey et carbu- fuerza rador, vuetva a tlenar et estanque con gaso- lina nueva y cambie etfiltro de combustible.
  • Page 61 IDENTIFICACI6N DE PROBLEMAS: Yea la secci6n apropiada en el manual a rnenos que este dirigido a un centro de servicio Sears. PROBLEMA CAUSA CORRECCI6N "ENCIEND,_' (ON) et interruptor. Las luz (ces) Et interruptor esta'APAGADO"(OFF). de lantera(s) Bombilla(s) o lampara(s) quemada(s). Cambie la bombilla(s) o lampara(s).
  • Page 63 GUiA SUGERIDA PARA MEDiR LAS PENDIENTES CON LA VISTA PARA UNA OPERACION SEGURA SOLAMENTE ANDE CUESTA ARRiBA O CUESTA ABAJO Y NO ATRAVIESE EL CERRO 15 GRADOS MAX. ADVERTENCIA: Para evitar da_os graves, haga funcionar su tractor arriba I y abajo de las pendientes, nunca transversalmente con respecto alas pendientes.
  • Page 64: Need More Help

    NEED MORE HELP? Y_y_ilifh@ the a_nswer and more o:___anagemyho_eoCO_ - for _free! o Find this and aLLyour other product manuals online. o Get answers from our team of home experts. o Get a personalized maintenance plan for your home. tools o Find information to help with home projects.

Table of Contents