Specifications; Safety Instructions - Craftsman 919.167241 Owner's Manual

Model No. 919-167241
Max. Developed HP 3
Bore 1.875"
Stroke 1.25"
Voltage-Single Phase 120V
Minimum Branch Circuit Requirement 15 amps
Fuse Type Time Delay
Air Tank Capacity 15
Approx. Cut-In 120
Approx. Cut-out 150
SCFM @ 40 psig 4.9
SCFM @ 90 psig 3.5
E.'ff.,1 =l_lk'd [=-ll]lm]::lmll_l::[,."]m m] = l=ll_l i ll [o _]_: "]
This manual contains information that is important for you to know and
understand. This information relates to protecting YOUR SAFETY and
PREVENTING EQUIPMENT PROBLEMS. To help you recognize this
information, we use the symbols below. Please read the manual and pay
attention to these symbols.
_ Indicates an imminently
hazardous situation
which, if not avoided, will result in death
or serious iniul_v.
_lndicates a potentially
,_azardous situation
which, if not avoided, could result in
death or serious injury.
_/_lndicates a potentially
hazardous situation
which, if not avoided, _ result in
minor or moderate in!urv.
_Used without the safety
alert symbol indicates a
potentially hazardous situation which, if
not avoided, may result in
_'I_'_ Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals
known (to the State of California) to cause cancer, birth defects or other
reproductive harm. Some example of these chemicals are:
• lead from lead-based paints
• crystalline silica from bricks and cement and other masonry products
• arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, always wear
MSHA/NIOSH approved, properly fitting face mask or respirator when using
such tools.
When using air tools, basic safety precautions should always be followed to
reduce the risk of of personal injury.
3* ENG D29408