Spark Arrestor - Craftsman 358.351440 Operator's Manual

proneto circulation disordersor
abnormal s welling.Prolonged usein
coldweatherhasbeenlinkedto blood
vesseldamagein otherwisehealthy
people.If symptoms occursuch
as
numbness, pare, loss of strength,
change in skin color or texture, or loss
of feeling in the fingers, hands, or joints,
discontinue the use of this tool and
seek medical attention. An
anti-vibration system does not
guarantee the avoidance of these
problems. Users who operate power
tools on a continual and regular basis
must closely monitor their PhySical
condition and the condition of this tool.
CHAIN BRAKE If this saw is to be used
for commercial logging, you must order
and install a chain brake to comply with
Federal OSHA Regulations for Com-
mercial Logging. Contact your Sears
Service Center or call 1-800-235-5878.
SPARK ARRESTOR: Your saw is
equipped with a temperature limiting
muffler and spark arresting screen
which meets the requirements of
California Codes 4442 and 4443. All
U.S. forest land and the states of
Califomia, Idaho, Maine, Minnesota,
New Jersey, Oregon, and Washington
require by law that many internal
combustion engines be equipped with a
spark arrestor screen. If you operate a
chain saw in a state or locale where
such regulations exist, you are legally
responsible for maintaining the
operating condition of_these parts.
Failure to do so is'a violation of the law.
Refer to Customer Responsibilities
chart in the MAINTENANCE section.
STANDARDS: This chain saw is listed
by Underwriters Laboratodes, Inc. in
accordance with Amedcan National
Standards for Gasoline-Powered Chain
Saws Safety Requirements (ANSI
B175,1-1991).
CARTON CONTENTS
Check carton contents against the fol-
lowing list.
Model 358.351440
• Chain Saw (fully assembled)
• Bar tool
• 2-cycle engine oil
(Bar oil not included)
• Examine parts for damage. Do not
use damaged parts.
• If you need assistance or find that
parts are missing or damaged, please
call 1-800-235-5878.
NOTE: It is ncFrnal to hear the fuel filter
rattle in an empty fuel tank.
Your unit has been factory tested and
the carburetor precisely adjusted. As a
result you may smell gasoline or find a
drop of oil/fuel residue on the muffler
when you unpack the unit.
ASSEMBLY
Your saw is fully assembled; no
assembly is necessary.
5