NuTone ILF120 Architectural & Engineering Specifications

DESCRIPTION
•
Remotely mounted fan reduces noise in occupied
areas.
• Use with adjustable inlet grilles to control flow for
any situation.
• Remote mounting provides flexibility in system
design.
•
High quality external rotor motor features long life,
efficiency and quiet operation.
•
Easy mounting to rafters or joist.
• Backward inclined centrifugal fan for strong air
delivery with minimal noise.
DESIGN FEATURES
Air Delivery: Model ILF120: 110 CFM at .2" S.P.
Model ILF130: 130 CFM at .2" S.P.
Model ILF250: 250 CFM at .2" S.P.
Sound Level: N/A -unit is remotely mounted
Material & Finish:
Housing: Durable polycarbonate plastic
Motor: External rotor, ball bearing, 115 volts AC, 60Hz;
ILF120
ILF130
ILF250
Blower Wheel: Backward inclined centrifugal.
Duct Size: 4" diameter ILF120
5" diameter ILF130
6" diameter ILF250
INSTALLATION
• Not for use in cooking areas.
• Not for use in wet locations.
• Suitable for use with solid state speed controls.
• Housing mounts directly to bracket. Bracket
mounts to rafter or joist..
• Complete installation instructions included with
each unit.
• Switches and accessories available separately.
ARCHITECT'S SPECIFICATIONS
Exhaust Fan shall be Model ILF120, ILF130 or
ILF250 as manufactured by NuT one according to
listed specifications.
®
.37 amps.
.37 amps
.80 amps
Architectural & Engineering Specifications
In-Line Fans
MODELS: ILF120, 130, 250
TYPICAL
INSTALLATION
GRILLE
March 2004
ROOF CAP
FAN
DAMPER/SLEEVE