Electrolux CEW30EF6GBE Use & Care Manual page 63

• Meatnotproperly prepared. Remove e xcess fatfrom
meat.Cutremaining f attyedges to prevent curling, b ut
do notcutintolean.
• Insert o nbroilerpanwrong sideup&grease not
draining. A lways place gridonthebroilerpanwithribs
up &slotsdowntoallowgrease to dripintopan(some
models).
• Grease hasbuiltuponovensurfaces. Regular cleaning
is necessary w henbroiling frequently. Oldgrease or
foodspatters causeexcessive s moking.
Flames inside oven or ,Excessive Spillovers in oven. For example this will
smoking from oven vent happen for pie Spi lovers or la[ge amounts of grease
left on the oven bottom. Wipe up excessive Spi!lovers
before Starting oven. !f flames or excessive Smoke ale
pEesent See About broiling in the Setting Oven
Controls Section.
Oven control panel beeps & displays • Oven control has detected a fault or error condition.
any F code error (for example F10, Press CANCEL to clear the display & stop beeping.
Fll, F13, F14, F15, F20, F23, F25, Try the bake or broil feature again. If the F code error
F30, F31 or Fg0) repeats, remove power supply to appliance, wait 5
minutes and then repower the appliance and set clock
for the time of day. Try the bake or broil feature again.
If the fault recurs, record fault and call for service.
Oven control panel beeps & cooktop • Cooktop control has detected a fault or error condition
control displays any E code error r the E code error persists, remove power supply to
(for example E11, E13 or E14) ap Dliance. wait 5 minutes and then repower the
appliance and set clock for time of day, Try the
cooktop setting again. If the fault recurs, record E code
fault and call for service ....