Craftsman 315.212010 Operator's Manual page 16

DUST GUIDE
See Figure 10.
Slide the end of the dust guide into the exhaust port in the
upper blade guard. Turn the guide so that the open end is
facing down or toward the rear of the saw.
EXHAUST
PORT
DUST BAG
See Figure 11.
A dust bag is provided for use on this miter saw. It fits
over the dust guide on the upper blade guard.
To install:
[] Squeeze the two metal clips to open the mouth of the
bag and slide it on to the dust guide.
[] Release the clips. The metal ring in the bag should lock
in between the grooves on the dust guide.
To remove the dust bag for emptying:
[] Reverse the above procedure.
DUST
GUIDE
©
Fig. 10
DUST
BAG
DUST
GUIDE
Fig. 11
16