Table of Contents
Advertisement
Each time a Fax message's retry limit is reached, Norstar Voice Mail stops
attempting to send the message and a non-delivery alarm message is generated. The
messages that failed to be sent are shown in the non-delivery alarm message. The
alarms will continue until the problem has been solved. Most delivery alarms are
caused by fax machine problems such as a paper jam or the fax machine running
out of paper.
Changing the FAX System parameters
You can change any of the FAX System parameters at any time. The FAX System
parameters appear in the same order as they appeared when you set up the FAX
System parameters. This section shows you how to select the change feature. It does
not show you how to change each parameter.
To change the FAX System parameters:
Log:
QUIT
RETRY
Admin
MBOX
AA
Admin
NET
Fax Admin
LOAD
Fax Ext:
xxxx
CHNG
P0886629 Issue 1.0
®
18. Press
to end this programming session.
ƒ · ° ‹
1. Press
2. Enter the System Coordinator Mailbox number and
password and press OK.
3. Press OTHR until you see the display in step 4.
4. Press FAX.
5. Press PARM.
6. To locate the parameter you wish to change,
press NEXT until the display with the parameter
appears. To change the parameter, press CHNG and
enter the new parameter value.
®
7. Press
to end this programming session.
Setting up and maintaining FAX 15
.
FAX Set Up and Operation Guide
Advertisement
Table of Contents
