Restart Menu; Thinkpad Setup Items - Lenovo ThinkPad T520 User Manual

Restart menu

If you need to close the ThinkPad Setup and restart the system, select Restart from the ThinkPad Setup
menu. The following submenu is displayed:
• Exit Saving Changes: Restart the system after saving the changes.
• Exit Discarding Changes: Restart the system without saving the changes.
• Load Setup Defaults: Load the default setting that was in effect at the time of purchase.
• Discard Changes: Discard the changes.
• Save Changes: Save the changes.

ThinkPad Setup items

The following tables show the contents of the Config menu, the Security menu, and the Startup menu
of the ThinkPad Setup.
Note: Some items are displayed on the menu only if the computer supports the corresponding features.
Notes:
• Enabled means that the function is configured.
• Disabled means that the function is not configured.
• Default values are in boldface.
Config menu items
Table 8. Config menu items
Menu item
Network
206
User Guide
Submenu item
Wake On LAN
Ethernet LAN Option ROM
Selection
• Disabled
• AC only
• AC and Battery
• Disabled
• Enabled
Comments
Enable the system to Power
on when the Ethernet
controller receives a magic
packet.
If you select "AC Only",
Wake On LAN is enabled
only when ac power adapter
is attached.
If you select "AC and
Battery", Wake On LAN is
enabled with any power
sources.
Note: AC is required with
magic packet type Wake
On LAN.
Note: Wake On LAN
function does not work
when a hard disk password
is set.
Load the Ethernet LAN
Option ROM to enable
startup from an integrated
network device.