Oki PRO510DW Printing Manual page 45

S
IMULATING ANOTHER PRINTER
The Graphic Pro color matching system can be used to simulate
the color output of another printer.
1
1. RGB data
2. RGB source profile
3. Printer output profile
NOTE
Be aware that if the device you are trying to simulate has
different color capabilities from your own printer, exact color
simulation will not be possible. For example, it may be difficult
to reproduce the exact colors of an inkjet printer on a toner-
based printer.
Additionally, differences in the range of printable colors
between different devices can make simulation using RGB
source data inaccurate. To achieve best results when
simulating the color output of other printers, you are strongly
advised to use CMYK data as a source. See CMYK Ink
Simulations on
To simulate the output of another printer, you need to download
at least 2 profiles to your printer using Profile Assistant:
> RGB Source Profile
>
Simulation Target Profile
> Printer Output Profile (optional)
Once the profile(s) have been downloaded, make the appropriate
selections in the printer driver.
– RGB
2
5
4. Printed document
5. Scanner, monitor, camera, etc.
6. Leave on Auto or select your custom profile.
page 48.
Color matching (advanced) > 45
SOURCE DATA
3
6
4