Oki C9600hdn Safety And Regulatory Information Manual page 4

Ensure the power cable is routed so as not to be damaged or cause a
trip hazard. If the cable becomes frayed or damaged replace it
immediately to prevent any risk of shock.
Do not twist, constrict or knot the power cable as this can cause
overheating which may lead to fire or electric shock.
Ensure the power socket to which the product is connected is easily
accessible at all times and not obstructed.
Use only the power cable supplied. Using a power cable not intended
for this product may lead to fire or electric shock.
To avoid risk of fire and electric shock, do not use the power cable
supplied with this product for any other electrical equipment.
If you do not connect the power cord or any other cables only as
directed in the User's Guide, this may result in a fire.
It is recommended that the machine is switched off prior to opening
covers otherwise there is a risk of electric shock.
When the product cover is open, do not touch the fuser unit or print
head as you may receive burns. Allow it to cool before touching.
If the product casing gets extremely hot or smoke, unusual smells or
abnormal noises are emitted from the product, there is a risk of fire.
Unplug the mains connector and contact your dealer.
If the product has been knocked over or damaged, there is a risk of
electric shock, fire and/or injury. Unplug the mains connector and
contact your dealer.
If any liquid (for example water) is allowed to enter the product,
there is a risk of fire. Unplug the mains connector and contact your
dealer.
Do not place containers containing liquid on the product as electric
shock, fire and/or injuries may occur.
If any foreign objects (for example clips) are allowed to enter the
product, there is a risk of electric shock, fire and/or injury. Unplug
the mains connector before removing the object.
Do not introduce foreign objects into the ventilation holes or operate
this product with any covers open or doors removed as electric shock,
fire and/or injuries may occur.
Do not use an extremely flammable spray near the product as the
product contains high temperature parts that may cause a fire.
Switch the product off before cleaning to prevent any risk of injury.
Clean using a damp cloth. Do not use liquid or aerosol cleaners.
Ensure loose clothing and hair is kept clear of moving parts when the
product is in operation to prevent possible risk of injury.
Do not carry out any operations on the product that are not specified
in the User's Guide. This may result in electric shock, fire and/or
injury.
Do not touch the battery if one is fitted to the product. There is a risk
of explosion if the battery is replaced by an incorrect type. The
product battery should not require replacement during the life of the
product.
Do not throw toner cartridges or image drum cartridges into a fire as
you may receive burns from a dust explosion.
After installing additional memory, hard disk drive, or any other
internally fitted option, any covers removed or doors opened must
be closed or replaced and secured to prevent risk of fire.
The acoustic noise of this product is less than 70 dB (A) as measured
in accordance with EN ISO 7779.
The operating condition range for your product is: 10 to 32°C and 20
to 80% RH. Operation of the product outside this range could result
in damage to the product.
If a scanner, finisher etc. is fitted, exercise care when moving these
items so as to avoid risk of entrapment or personal injury.
If the product is installed on a cabinet or high capacity feeder, ensure
wheel locks are applied once placed in final position for use, to
prevent risk of movement or injury.
English
Limited Warranty, US and Canada
U.S. and Canada only
Oki Data Americas, Inc. (Oki Data) warrants this C9600/
9800 (hereinafter "the Product") to be free from defects in
material and workmanship and will remedy any such
defect according to, the terms of this Limited Warranty.
Oki Data will repair or at its option, replace, with the same
or its functional equivalent, at no charge, any defective
component(s) of the Product for one (1) year from the
date of purchase except for the printhead (LED imaging
array), which is warranted for a period of five (5) years
from the date of purchase.
This Limited Warranty only extends to the original
purchaser of the warranted item. This Limited Warranty is
not transferable. This Limited Warranty does not extend
to consumable items or supplies, such as toner cartridges,
image drums, ribbon cartridges, fuses, etc.
On-Site Repair
Note: On-Site Repair is available in the United
States and Canada only. On-Site Repair does
not include the replacement or repair of
Product consumables or supplies.
Oki Data will, for a period of one (1) year from the
date of original purchase, repair or replace (at Oki
Data's option) on-site at the original purchaser's
facility and without charge, any defective
component(s) of the Product provided that the
warranty service is performed by an Oki Data
authorized service provider. The printheads (LED
imaging arrays) have a 5-year parts only warranty
from date of original purchase. Following the first
year of warranty coverage, the printheads will be
replaced by an authorized Oki Data service provider
at Oki Data's then current labor rates.
To make request or claim for service under the one
(1) year parts and labor coverage of this Limited
Warranty, contact your Oki Data Authorized Dealer,
authorized third-party service provider, or Oki Data.
Oki Data reserves the right to use new and/or
refurbished parts for the warranty repair.
As a condition of this Limited Warranty, requests for
On-Site Repair must include the name and phone
number of a fully competent and responsible adult with
the authority to consent to the entry of the servicing
technician to the premises where the Product is located,
and who will remain with the servicing technician while
the service work is performed. Any and all dangerous
conditions must be removed from the site prior to and
throughout the time a service technician is present. The
service technician may refrain from entering the
premises or continuing to provide services at any site, if
in the servicing technician's reasonable judgement the
site poses a risk of physical harm or danger. If warranty
services cannot be performed or completed due to any
of the foregoing reasons the On-Site service option is
4 - English