Removal steps of PCI Express Mini Card for wireless LAN
1
In step
, unplug the connectors by using the antenna RF connector removal tool or pick the connectors
with your fingers and gently unplug them in the direction of the arrows.
Note: Your model might look slightly different from the illustration above.
Step
Screw (quantity)
2
M2 × 3 mm, wafer-head, nylon-coated (1)
When installing: Plug the gray cable into the jack marked MAIN or M, and the black cable into the jack
marked AUX or A on the card.
1080 PCI Express Mini Card for wireless WAN or mSATA solid state drive
For access, remove these FRUs in order:
Color
Torque
Black
0.181 Nm
(1.85 kgfcm)
.
Chapter 9
Removing or replacing a FRU
65