Stopping The Auto Migration Function; Reserving A Volume - HP XP P9500 User Manual

Stopping the Auto Migration function

Before creating a manual migration plan, the Auto Migration function must be disabled. If you
perform a manual migration operation, all current Auto Migration plans are canceled.
Procedure 6 To stop the Auto Migration function:
1. Click Actions Other Function Auto LUN to open the Auto LUN window.
2. Click
3. In the Auto LUN window, click Auto LUN. A different window appears.
4. Click the Auto Plan tab to display the
5. Click Delete All to stop all current auto migration plans.
6. Set the Auto Migration function to Disable.
7. Click Set to apply the settings to the storage system.

Reserving a volume

To perform manual or auto migration, volumes in a HDD class must be in Reserve status to be
considered as target volume candidates. Auto LUN cannot take place when no volumes are
reserved.
Prerequisites
The volume meets all requirements as a target volume candidate
Procedure 7 To reserve a volume:
1. Click Actions Other Function Auto LUN to open the Auto LUN window.
2. Click
3. In the Auto LUN window, click Auto LUN. A different window appears.
4. Click the Attribute tab to display the
5. In the navigation tree, double-click the HDD class in which you would like to reserve a volume.
The HDD class folder expands and parity groups in that HDD class can be viewed.
6. In the expanded HDD class folder, select a low-usage parity group.
The volumes contained in the selected parity group load in the
26 Auto LUN operations
to change to Modify mode.
to change to Modify mode.
"Auto Plan window" (page
"Attribute window" (page
52).
55).
"Parity Group list" (page 57).