P/Das Support, Restrictions; Restrictions; Gdps Support - HP XP P9500 User Manual

Table 6 Corresponding PPRC, BCM commands (continued)
PPRC command Parameter
QUIESCE
CDELPAIR DEVN
PRIM
SEC
CRECOVER DEVN
PRIM
SEC
ID
CQUERY DEVN
FORMAT/UNFORMAT
VOLUME/PATHS
CGROUP DEVN
PRIM
SEC
FREEZE/RUN
CDELPATH DEVN
PRIM
SEC
*1. The YKSUSPEND command supports only the pair suspend command for M-VOL.

P/DAS support, restrictions

Continuous Access Synchronous Z supports the IBM P/DAS host software function. P/DAS allows
you to relocate or migrate data by redirecting all application I/Os from the M-VOL to the R-VOL
without interrupting access to the data. See the following IBM publications for important information
on the requirements and procedures for P/DAS operations: Planning for IBM Remote Copy
(SG24-2595), Advanced Copy Services (SC35-0355), DFSMS MVS V1 Remote Copy Guide and
Reference (SC35-0169).

Restrictions

The following restrictions apply to P/DAS use with Continuous Access Synchronous Z:
P/DAS through channel extenders is not supported.
P/DAS does not support CFW operations. You must stop CFW applications before performing
P/DAS operations on Continuous Access Synchronous Z volumes.
P/DAS swap option #2 (switch pair & swap) is supported for P/DAS between the P9500 and
XP12000 Disk Array/XP10000 Disk Array storage systems.
Contact your HP account team for the latest information on P/DAS support.

GDPS support

Continuous Access Synchronous Z provides remote copy support for IBM's Geographically Dispersed
Parallel Sysplex® (GDPS) facility. GDPS is an IBM service for mirroring data and balancing
20 Requirements and specifications
BCM command
YKDELETE
YKRECOVER
YKQUERY
YKFREEZE/YKRUN
YKDELPTH
Support type
Not supported
config
config
config
Not supported
Not supported
config
config
config
command
config
config
config