Enabling Or Disabling Sim Reporting - HP XP P9500 User Manual

Table 25 SIM reference codes, types, and descriptions (continued)
Reference code
Byte 22 Byte 23
DC 9X
DC AX
Notes:
If the DKC emulation type is 2105 or 2107, the setting of the system option mode 308 determines whether the SIM
is reported to the host, as explained below:
When system option mode 308 is set to ON, the SIM is reported to the host.
When system option mode 308 is set to OFF, the SIM is not reported to the host. By default, system option mode
308 is set to OFF.

Enabling or disabling SIM reporting

You can enable or disable the reporting of SIMs to the host.
To enable or disable SIMs reporting to the host
1. In Remote Web Console click Actions > Remote Copy > Continuous Access Journal Z > Optional
Operation.
2. Click
3. Select LDKC in the tree. The list displaying on the right-side shows whether or not SIMs are
reported.
4. You can change the SIM reporting setting for all CUs, or for one CU.
To change the setting for all CUs, right-click LDKC in the tree and select Change SIM
Report.
To change the setting for one or more (but not all) CUs, select one or more CU in the list
on the right-side pane, right-click, and select Change SIM Report.
5. The changes you made display in the Preview list. To delete a change, right-click and select
Delete.
When you right click the Preview list, the Modify command is unavailable.
6. Click Apply when ready.
To see information about any error during this operation, right-click the error code and then select
Error Detail. An error message appears with information about the error.
Severity Description
A failure has been detected in the
secondary system.
Serious A volume being used by P-VOL of the Cnt
Ac-J Z pair for delta resync operation has
been suspended.
A failure has been detected in the primary
storage system.
Serious A volume used in a P-VOL that is
configured in a multiple primary and
secondary system combination has been
suspended.
A failure has been detected in other
primary and secondary systems.
to change the mode from View to Modify.
System generating the
SIM
Yes, repeatedly.
Primary storage
system
Service information messages (SIMs)
SVP log
file
Primary
storage
system
SIM Log
121