Part Code 3010; Part Code 03022 - HP XP P9500 Manual

Table 33 Error codes (part code 3005) (continued)
Part Error
Code Number
3005 781 1 1
3005 781 12
3005 781 13
3005 781 14
3005 781 15
3005 781 16
3005 78124

Part code 3010

Table 34 Error codes (part code 3010)
Part Error
Code Number
3010 1046

Part code 03022

Table 35 Error codes (part code 03022)
Part Error
Code Number
03022 105131
03022 105132
03022 105133
03022 105134
03022 105135
03022 105136
03022 105137
Error Message
External volumes with mixed cache
mode setting, enabled and disabled,
cannot be used as pool volumes in a
THP pool.
External volumes with cache mode
disabled cannot be specified as pool
volumes for the pool.
THP pool initialization cannot be done
because the THP V-VOL is used by
another program product.
The operation cannot be done because
the specified pool is in relocating
operation.
The operation cannot be done because
the specified pool is in monitoring
operation.
The processing cannot continue due to
an internal logical contradiction.
Reclaim Zero Pages cannot be done for
the TSE volume.
Error Message
The number of Cache Residency settings
has exceeded the maximum number of
available Cache Residency areas.
Error Message
SSID cannot be allocated to all the LDEVs
with the specified initial SSID.
Short of {0} LDEV ID(s).
The processing cannot continue due to
an internal logic contradiction.
The specified LDEV does not exist in the
configuration.
The selected LDEV has an LUN path
setting.
The specified LDEV is a pool volume.
The selected LDEV has an LDEV Security
setting.
Recommended Action
Verify the cache mode of the subject
external volumes.
Verify the cache mode of the subject
external volumes.
Execute the instructions noted in Thin
Provisioning of the Web Console section,
and then retry the operation.
Check the status of the pool, and then
retry the operation.
Check the status of the pool, and then
retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Check the settings.
Recommended Action
Reduce the number of Cache Residency
settings, then retry the operation.
Recommended Action
Check the setting(s).
Check the setting(s).
Execute refresh.
Execute refresh.
Check the setting(s).
Check the setting(s).
Check the setting(s).
Severity
Level
W
W
E
W
W
E
W
Severity
Level
W
Severity
Level
W
W
E
E
W
W
W
Part code 3010 99