HP StorageWorks XP12000 - Disk Array Owner's Manual page 26

Item
Label
10
PS ON/OFF
11 EMERGENCY
26
Hardware
Description
Indicator
Switch Used to power on/off the disk
array. During normal operation, this
switch should be in the ON position.
The switch functions only if:
The PS ENABLE switch (9)
is in the ENABLE position.
AND
The PS REMOTE/LOCAL switch
(13) is in the LOCAL position. Do not change
the switch position unless directed to do so by
HP service personnel.
LED (Red) During normal operation, this LED should be on.
ON:
The UNIT EMERGENCY POWER OFF switch
on the back of the disk array cabinet is in the
ON position.
OFF:
The UNIT EMERGENCY POWER OFF switch
is in the OFF position. Place a service call to
HP to have an HP support representative reset
the switch.