52
|
Setting Up the Printer
Note: If you see a
message that the installer
has detected an older
version of EpsonNet
Config on your system,
you must uninstall the
older version before you
can install the new one.
Open the Applications
folder and drag the
EpsonNet folder into the
trash. Then reinstall your
printer software.
5. Click the
button.
Install
6. Read the license agreement and click
7. Follow the instructions to install all necessary software and manuals,
register your printer, and place a link to the Epson Professional Imaging
website on your desktop.
8. When you're done, click
if prompted.
9. After your Macintosh restarts, do one of the following:
Accept
and eject the CD. Restart your computer
Exit
52
.