Epson STYLUS PRO 7700 User Manual page 177

Message
CLEANING ERROR
AUTOMATIC HEAD
CLEANING FAILED
RETRY?
YES
NO
CLEANING ERROR
NOT ENOUGH INK.
CONTINUE CLEANING?
YES (RECOMMENDED)
NO
CLEANING ERROR
NOT ENOUGH EMPTY
SPACE IN MAINT TANK.
CONTINUE CLEANING?
YES (RECOMMENDED)
NO
COMMAND ERROR
CHECK DRIVER SETTINGS
CUTTER UNIT NEARING
END OF SERVICE LIFE.
RECOMMEND REPLACING
THE CUTTER UNIT
FRONT COVER OPEN
CLOSE FRONT COVER
F/W INSTALL ERROR
UPDATE FAILED RESTART
THE PRINTER
INK CARTRIDGE
INK LOW REPLACE INK
CARTRIDGE
Explanation
Head cleaning did not clear the
nozzles.
There is not enough ink to
perform cleaning.
There is not enough space in
the maintenance tank to
perform cleaning.
You may be using the wrong
printer driver.
Damaged data was sent to the
printer or the data has an
incorrect command.
The paper cutter may be dull.
Front cover is open.
Firmware update failed.
The ink cartridge is expended.
177
Solving Problems
Response
Press to clear the error and run the
head cleaning utility again. If cleaning
doesn't start, cancel printing from the
computer. Then turn the printer off and back
on again.
Select Yes and replace the cartridge (see
page 157).
Select Yes and replace the maintenance
tank (see page 166).
Press to cancel the print job and reset
the printer. Make sure you installed the
correct driver for your printer.
Replace the paper cutter; see page 162.
Close the front cover.
Restart the printer, then update the
firmware again; see page 55.
Replace the ink cartridge; see page 157.
| 177