HP StorageWorks XP10000 - Disk Array Configuration Manual page 21

3. Change to the new directory:
Example
$ set default
$1$dga100:[user]
4. Verify that this directory exists:
Example
$ show default
$1$dga100:[user]
If the user directory does not exist, OpenVMS returns an error.
5. Create a test user file:
Example
$ create test.txt
this is a line of text for the test file test.txt
[Control-Z]
The create command creates a file with data entered from the terminal. Control-z terminates
the data input.
6. Verify whether the file is created:
Example
$ directory
Directory $1$DGA100:[USER]
TEST.TXT;1
Total of 1 file.
7. Verify the content of the data file:
Example
$ type test.txt
this is a line of text for the test file test.txt
XP Disk Array Configuration Guide for OpenVMS 21