5 The UPS name displays in the tree view directory (in the LAN directory for LAN connections or in the
WAN directory for Internet connections).
If the Accept Remote Control option of the Agent is off, you can only remotely monitor the UPS. All
control functions are disabled (see Figure 91).
Figure 91. Control Functions Disabled
If the Accept Remote Control option of the Agent is on, you can remotely monitor and control the
UPS. All control functions are available (see Figure 92).
Figure 92. Control Functions Enabled
You can manually delete a remote Agent by right-clicking the selected Agent and clicking Delete
(see Figure 93).
Configuring the Software
86