Communicating Through The Network Management Card - Dell PowerEdge UPS 500T Installation And Configuration Manual

Communicating Through the Network Management Card

NOTE:
See Table 6 on page 132 for a complete list of Dell Command User Interface (CUI) commands.
The following procedure is an example of a user entering the settings for a graceful shutdown of selected
devices through the Network Management Card:
1 Enter the installation path: /opt/ups
2 Enter ./CuiManager to start the CuiManager (see Figure 115).
3 Search for a single device by entering search4 and the device network IP address, or search for multiple
devices within a range.
Example command:
search4 -ip 172.18.127.1 -ip 172.18.127.254 -c public
All devices in the network IP address from 172.18.127.1 to 172.18.127.254 are added.
Figure 115. Searching for Devices
Installation on a VMware ESX Server
114