HP StorageWorks NAS 8000 - Version 1.6.X Manual page 48

Installation Guide
4. Check Activate Cluster to save your settings and exit the Wizard.
If you are unable to access Command View NAS, use the command line interface to run
clusterQuickStart. This command allows you to perform basic cluster configuration.
Additional cluster features can be configured using the command line interface. Please see the
HP StorageWorks NAS 8000 Command Reference.
Note:
the configuration.
48
You can make changes with the Command View NAS web interface later (see the HP
StorageWorks NAS 8000 User's Guide).
We recommend running the system on default settings before implementing any changes to
HP StorageWorks NAS 8000 SAN High Availability, Solution Integration Manual (SIM)