Table of Contents
Advertisement
4
1
Primary length guide
2
Length guide lock
3
Secondary length guide
4
Width guide
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each paper drawer or tray
separately. Keep all other trays closed until needed.
Notes:
•
For instructions on loading paper sizes larger than A6 and
envelopes, see "Loading the standard or optional 550‑sheet
tray" on page 6.
•
For a complete list of supported paper sizes, see the "Supported
paper sizes, types, and weights" section in the User's Guide.
Loading narrow paper sizes such as envelopes and A6
1
Pull the tray completely out.
Note: Do not remove trays while a job prints or while Busy
appears on the display. Doing so may cause a jam.
2
1
3
2
Squeeze and slide the primary length guide toward you until it
stops.
Notes:
•
The length has a locking device. To unlock the length guide,
slide to the left the button on top of the length guide. To
lock, slide the button to the right when a length has been
selected.
•
You can only slide the secondary length guide when the
primary length guide reaches the edge of the width guide.
8
1
2
3
Advertisement
Table of Contents
