Removing The Processor Airflow Shroud - Dell PowerEdge T300 Series Hardware Owner's Manual

Removing the Processor Airflow Shroud

CAUTION:
cover and access any components inside the system. Before performing any
procedure, see your Product Information Guide for complete information about
safety precautions, working inside the computer, and protecting against
electrostatic discharge.
1 Remove the system cover (see "Removing the System Cover" on page 66).
2 Press the release tab on the expansion card cover and pivot the cover open.
NOTE:
Figure 3-7. Opening and Closing the Expansion Card Cover
1 expansion card cover
3 Remove the cable(s) from the cable guides and fold the SATA cable(s)
away from the processor airflow shroud.
70
Installing System Components
Only trained service technicians are authorized to remove the system
You can remove the expansion card cover, if desired, and set it aside.
1
2 release tab
2