Xml Uri For Key Press Simulation - Aastra 9143i Series Administrator's Manual

IP Phone Administrator Guide
Creating an XML Application

XML URI for Key Press Simulation

The phones provide a feature that allow an XML Developer or Administrator to
define XML Key URIs that can send key press events to the phone, just as if the
physical hard key, softkey, or programmable key were pressed on the phone.
When the Key URI event is sent from the server to the phone, the phone initiates
the event as if the key was physically pressed. If the key is not present on the
phone (hard key) or not available (softkey or programmable key), when the phone
receives the URI, the event is discarded. If you are in the process of changing the
softkey or programmable key setting, or the key is disabled while the event is
being processed, the request is discarded. The phone maps key events to it's
physical keys and not to it's mapped logical keys.
The following table identifies the XML URIs for pressing buttons on the phone..
XML Key URI
Line Keys
Key:Line1 to Key:Line4
Keypad Keys
Key:KeyPad0 to Key:KeyPad9
Key:KeyPadStar
Key:KeyPadPound
Softkeys
Key:SoftKey1 to Key:SoftKey<n>
Key:TopSoftKey1 to Key:TopSoftKey<n>
top
Programmable Keys
Key:PrgKey1 to Key:PrgKey<n>
F-60
Description
Line 1 to 4 Keys
Note: The phone ignores URI line keys 5 to
9 since it does not have Line 5 to 9 physical
keys.
Numeric Keypad Keys 0-9
* - Star Key
# Hash Key
Softkey 1 to <n> (valid softkeys depend on
the number of physical softkeys on the
phone)
Top softkeys 1 to <n> ((valid top softkeys
depend on the number of physical top
softkeys on the phone)
Programmable keys 1 to <n> (valid
programmable keys depend on the number
of physical programmable keys on the
phone)
41-001160-03, Rev 00, Release 2.4