Setting Clock And Minute Timer - Frigidaire GAS RANGE Owner's Manual

Setting Clock and
Minute Timer
(some models)
: Flashing indicates
Minute Timer mode
Your model may be equipped with the clock shown below. Follow the
instructions to set the clock and minute timer on your range. Not all manual
clean ranges are equipped with a clock.
To Set the Clock
When the range is first plugged in, or when the power supply to the range has
been interrupted, "12:00" will flash in the display window.
1. Push 8"
2. Push in and hold _ or _] until the correct time appears in the display.
[_ Advances time, _ reverses time.
To Set the Minute Timer
1. Push _, "0:00" will appear in the display window. The timer can be set
for any amount of time from 00:01 minute to 12:00 hours.
2. Push in and hold [_ until the correct amount of time appears in the
display. _ Advances time, _ reverses time. The minute timer will
automatically start when the button is released. The ":" will flash to
indicate Minute Timer mode.
3. When the set time has passed, the control will display"0:00" and beep three
times. The timer will continue to beep until _ is pressed.
4. Push _ to cancel the timer and return to the clock mode.