Olympus SP-565UZ Instruction Manual page 73

Saving settings
"Settings are not saved after the power is
turned off"
• When mode dial is set to P, A, S, M or _:
settings will be saved even if the power is turned
off (except for self-timer, [PANORAMA] and
[TIMELAPSE]).
• When made dial is set to ETIr_ or SCN :
settings will be changed back to default when the
power is turned off (except for
[_-IMAGE QUALITY]].
_ When one of the messages below is
displayed on the LCD monitor, check the
following.
lye
[_ Card problem
CARD ERROR Insert a new card.
[_ Card problem
WRITE Use a computer to cancel the
PROTECT read-only setting.
Internal memory problem
• Insert a card.
MEMORY FULL • Erase unwanted images: I
[_ Card problem
• Replace the card.
CARD FULL • Erase unwanted images. _
Card problem
• Use _ ,_ to select [CLEAN
CARD], and press the
_i_ button. Take out the card,
wipe the contact area (p, 78)
with a soft, dry cloth, and then
load the card again.
• Use _>L,_ to select
[FORMAT], and press the
_*_ button. Next, use _>,L,t,_
to select [YES], and press the
_i_ button. 2
Internal memory problem
Use _,L,_ to select [MEMORY
FORMAT], and press the
@ button. Next, use ?_ ,L,t,5
to select [YES], and press the
@ button: _
Recording has
stopped to allow
camera to cool.
Please wait a
moment.
Camera is
cooling,
Please wait a
moment.
Operation problem
Allow the camera to cool down
before you begin shooting again.
i_[[] Internal memory/Card problem
NO PICTURE Take pictures before viewing
them.
Problem with selected image
[_ Use photo retouch software,
PICTURE etc. to view the image on a
ERROR computer. If the image still
cannot be viewed, the image file
is corrupted.
_3
THE IMAGE Problem with selected image
CANNOT Use photo retouch software, etc.
BE EDITED to edit the image on a computer.
Operation problem
CARD-COVER Close the card cover.
OPEN
CZ3 Battery problem
• Insert new batteries.
BATTERY
EMPTY • If using rechargeable batteries,
charge the batteries.
[_X connection problem
Connect the camera and
NO computer or printer correctly.
CONNECTION
Printer problem
Load paper into the printer.
NO PAPER
Printer problem
Refill the ink in the printer.
NO INK
'_V" Printer problem
Remove the jammed paper.
JAMMED
SETTINGS Printer problem
Return to the status where the
CHANGED "_
)rinter can be used.
Printer problem
r_ Turn off the camera and )rinter, check the printer for
PRINT ERROR any problems and then turn the
power on again.
Problem with selected image
CANNOT PRINT *_ Use a computer to print.
"_ Before erasing important images, download them to
a computer.
"_All data will be erased.
"_This is displayed, for instance, when the printer's
paper tray has been removed. Do not operate
the printer while making the print settings on the
camera.
,4 This camera may be unable to print images taken by
other cameras.
EN i_:_:7_i!_i!_i!_